foam cutting machine heating wire handheld manufacturing easy operation factory cutter building materials high temperature foam cutting knife

Support one-time shipment, contact customer service for large quantities.

This connection has two types of electronic temperature regulation and temperature control.Standard model does not include a ruler or a straightedge.Please provide the Chinese text you want to translate, and I will translate it into English for you.Improved model with dimensions and ruler!

This cutting machine is not allowed to be used for more than 60 minutes at a time. After working for 60 minutes, it must be stopped for at least 30 minutes before it can be used again. The total working time should not exceed 5 hours.

Please open the box and inspect the goods before signing for them. If you find any damage, please refuse to sign. Contact us in time for a replacement! If you sign and then inform us of any damage, we will not be responsible. Once the goods are sent, the shipping fee is generated. Refusal to accept or no refund of shipping fees, thank you!

1. This machine has a low power consumption, and it only costs a few cents to operate.

2. This machine is equipped with a switch, making operation even more convenient!

This machine can cutfoam,sponge,Pearl cotton. Ribbon.KT board, polystyrene board, insulation board, polyethylene foam boardAnd so on.

Cut and carve the above materials into specific shapes. Examples include: architectural models, sand tables, model airplanes, car sponge seat cushions, etc.

KL-40 worktop size: length 40* width 28CM, cutting thickness 20CM, width 25CM. With 0.M electric heating wire.

KL-50 worktop size: length 50* width 28CM, cutting thickness 20CM, width 35CM.Use 0.M electric heating wire.

KL-60 worktop size: length 60* width 38CM, cutting thickness 25CM, width 45CM.Use 0.M electric heating wire.

KL-80 worktop size: length 80* width 38CM, cutting thickness 25CM, width 65CM.Use 0.M electric heating wire.

KL-100 worktop size: length 90* width 38CM, cutting thickness is 25CM, width is 75CM, using 0.M electric heating wire.

Installation method is only 2 steps:

1. Insert the short end of the '7'-shaped frame into the square frame of the workbench and secure it with screws.

2. Hang the electric heating wire through the individual adjustment knob at the end of the '7'-shaped long side, and then fix it to the spring on the adjustment knob. It can then operate normally.

The price of this machine does not include any additional charges. If you need to pay any additional fees, please inform our customer service in advance. A receipt will be issued without any additional charges.

heating wireAvoidElectric heating wireflushedCutting. Strongly recommend wearing work gloves when cutting. Turn off the power immediately after cutting is completed.

Cutting some materials may produce an odor, so it is recommended toVentilation environmentCutting.

When cutting, the temperature of the cutting wire is relatively high, so it should be avoided.Flammable goodsExclamation mark!

Should not letchildrenPlay with this machine.

- -_- -

- -_- -

- -_- -