Search history
Clear allSearch by image
XDrag and drop an image here or upload an image
Max 5MB per image
UploadSign In | Join


Instructions: Press the switch once for direct spraying and the rainbow light to turn on; press it a second time for intermittent spraying (turns on for 4 seconds and off for 4 seconds); pressing it a third time puts the device in shutdown mode.
Product specifications
Output interface: DC5V/1A, Rated power: 2W
Input interface: DC5V/0.4A Product capacity: 200ML
Usage duration: 4-6 H; Spray volume: 25-40 ML/H
Spray Mode: Continuous / Intermittent Applicable Water Quality: Mineral water / Tap water








Warm reminder:
1. Do not break the atomization disc at the spray nozzle!!!
2. Before first use, remove the cotton swab (be sure not to lose the spring at the bottom), soak it in water for 1–2 minutes so that the swab absorbs sufficient moisture before reinserting it for use.
3. Only tap water or mineral water is allowed; purified water is not permitted (as it will affect the fogging effect)
Usage and Features:
1. Turn on the power, press the button gently to activate the continuous spray mode. Press the button again to switch to the intermittent spray mode (spray for 4 seconds, pause for 6 seconds). Press it a third time to turn off the device.
2. While the device is turned on, hold the button for two seconds without releasing it to turn off the night light (colorful light), then hold it again to turn the night light back on.
3. All spray mode settings have an automatic power off after 3.5 hours, and it can be restarted for continued use.
4. For the first use, fill it with water (about 90%) and let it stand for 3–5 minutes before turning on.
Update time:
TOP