X Email Mobile
| 220v domestic flat plug | ¥10.5 | 4613 piece available |
|
| 220v european standard round plug | ¥10.5 | 3462 piece available |
|
| 110-220v american standard led lamp tube | ¥10.5 | 3370 piece available |
|
| 220v british standard three plug | ¥12.0 | 4278 piece available |
|
A new item has been added to your Shopping Cart. You now have items in your Shopping Cart.
Special Note:
The power cord for the mosquito killer lamp can be customized according to the requirements of various countries.
To facilitate the matching of the corresponding power cord and voltage requirements, please make a note when placing your order.
Please choose for use in mainland China and other regions: 220V flat plug
Most of Europe uses: 220V, European standard round plug
Please choose from the following locations: 110V American standard LED tubes/110V American standard UV tubes (only suitable for 110V and not for 220V voltage).
Mosquito Kill Light Product Description
1. Good Adaptability:
Suitable for bedrooms, living rooms, restaurants, bathrooms, offices, and other places.
6. Usage Method
Easy to operate, just plug in and use.
Section 7: Daily Maintenance
1. The remains of mosquitoes on the grid should be cleaned in time. The method is: turn off the power and unplug the power plug, hold the base and rotate it in the direction of the word needle to remove the base, use a broom to gently sweep, and then reinstall the shield in the original way.
2. After using the lamp for a long time, the tube will gradually become dimmer until it stops working. It should be replaced. The method is: turn off the power, unplug the power cord, remove the base by following the above method, rotate the lamp tube counterclockwise to remove it, install the new lamp tube and replace the guard net.
Notes:
1. Please do not touch the grid with your fingers or metal conductive objects. Do not allow children to play with it. This product should be placed more than 2 meters away from flammable items. Do not hit the grid with hard objects to avoid contact between the grids and loss of mosquito-killing effectiveness. After the mosquito lamp is turned off, there is still a small residual voltage on the metal mesh. Be careful not to touch it with your hands.
2. When cleaning the mosquito trap, first turn off the power, then use an insulated metal rod to gently touch the grid to discharge any residual electricity, and then open the base to clean the metal mesh with a soft bristle brush. Always remember not to operate while the power is on.
3. Do not put your hand inside the product while it is operating to avoid any accidents.
|
|
Update time：
TOP
