[Material] metal alloy
[Packaging] simple pack of 10 pieces per box

[Product description] The default is simple packaging. You need to add 1 yuan for independent gift box packaging. You can contact customer service to change the price.

Factory wholesale support one piece dropshipping

return and exchange of packages with quality problems (freight at your own expense)

precautions

1. Contain pressurized flammable gas, please stay away from children;

2. Do not puncture or throw a lighter, and do not throw it into the fire;

3. Please use it in a ventilated environment and pay attention to flammable items;

4. It is strictly prohibited to face, skin, clothing and other combustible substances in the direction of fire head to avoid danger;

5. Please check the position of burner when igniting, and press the ignition appropriately. Different styles of lighters are ignited in different ways;

6. When using, if any impurities such as soot accidentally fall into burner, blow it in time to remove the sundries, otherwise it will cause bad fire;

7. Langsheng, grinding wheel and gasoline lighter, if Machine cover is turned on, the gas starts to escape. Therefore, when there is no ignition, please be sure to cover Machine cover tightly for storage;

8. This product is not suitable for lighting. Do not burn continuously for more than 1 minute to avoid scalding skin with high temperature;

9. Do not put the lighter in a high temperature environment (50 degrees Celsius/122 degrees Fahrenheit) for a long time, and avoid direct sunlight for a long time, such as the surrounding stove, outdoor closed unmanned carriage and trunk;

10. Due to the limitation of combustion conditions caused by climate in areas above 3000 meters above sea level, the ignition performance of windproof and direct impact lighters will be greatly affected. We recommend that you use an open flame lighter;

11. When using arts and crafts lighters such as desktop, the positions of seven burner, press, air inlet, and flame regulator should be clearly defined for correct use;

12. Qualified butane gas should be used. Inferior gas may damage the lighter or reduce its service life.

Regulating flame
1. When using, as the gas content of the product decreases and the temperature of the surrounding environment changes, the flame height will change to a certain extent, which is a normal phenomenon. You can adjust the flame height moderately;
2. When using, the normal flame height should be controlled:
windproof and direct punching lighters are 1.5-2.5cm; Langsheng, gasoline and open flame lighters are 2.5-4.0cm;
3. If you need to adjust the flame height, please use a screwdriver to align the flame regulator groove; If the lighter itself has adjustable ring, you can directly adjust it with your fingers (-) the direction of the arrow is clockwise, and the flame height can be adjusted to low;
the flame height can be increased by rotating counterclockwise in the direction of the (+) arrow.
4. The gasoline lighter should control the flame height by adjusting the ignition height of lamp wick. The flame height is too high, you can use scissors to cut a little lamp wick;
if the flame height is too low, pull out lamp wick appropriately.
Gas filling method
1. When adding gas, there must be no Mars or fire around, and ensure safety. Do not smoke while adding gas;
2. Qualified butane gas should be used, and inferior gas may damage the lighter or reduce the service life;
3. When adding gas to ordinary models, please stand the lighter upside down, align the gas bottle and cover the lighter air inlet, press it several times with force, and keep it for about 2 seconds each time; If the gas cannot be filled, it may be that excess air is left in the air box. At this time, you can deflate it. At this time, it should be vertical, align it with small screwdriver and quickly deflate it 1-2 times, and then run the air filling operation upside down;
4. When refueling gasoline, open the head cover, pull out and reverse the movement, open the outer sponge and add appropriate amount of gasoline. After the gasoline penetrates into the inner Cotton, cover the outer sponge and put it into the shell;
5. After all kinds of lighters replenish fuel, wait at least one minute to adjust the temperature of the newly filled gas to room temperature, and wait until the residual gas attached to the lighter surface is completely volatile before ignition. If the ignition operation is carried out immediately at this time, the residual gas on the surface of the lighter may burn, causing unnecessary danger. After re-supplementing the gas, if the flame height is too high or too low during use, it is normal, and the flame height can be adjusted moderately.