Metal and non-metal materials such as steel, aluminum, ceramics, glass, plastic, sealed electronic components, etc.

Usage:
1. When using, the surface of the sticky object should be polished and cleaned;
2. When using, mix and stir components A and B evenly according to the 1:1 ratio, and then glue them;
3. Epoxy glue series products are suitable for ambient cure, and can also be heated to 30 ℃-80 ℃ for better curing effect. The higher the temperature, the faster the curing speed and higher the strength;
4. After the glue is applied, the adhesive should be fixed with a clip until the glue is completely cured before use.
Note:
1. Keep the workplace universal and avoid children's contact;
2. When operating, if it touches the skin or eyes, wash it with clean water or seek medical treatment immediately;
3. Do not mix the two glue solutions when not in use, and do not cover swimming cap incorrectly after use;
4. Store in a cool, dry and general place and keep away from high temperature;
5. When users use it in batches, please do the test first. Avoid affecting the bonding effect due to improper operation.