Section 1.How to inflate correctly

 1.Before inflated, use a small tool to hold the inflated core, completely release any residual gas inside to eliminate the pressure in the lighter gas canister.

 2.Press the gas cylinder outlet vertically downwards, press it each time5About a second or two, two or three times.

 3.Please wait for 3-5 minutes after the air is fully inflated.5It will take about a minute or so to use, such as5If the engine still doesn't start after a minute, please adjust the valve larger to solve the problem. (Note)+" -The direction.

For more details, please refer to the following detailed introduction.

Special Reminder: Altitude1000Above 1000 meters of altitude, the use of inflatable windproof and direct-strike lighters may be affected. The rate of ignition may decrease significantly, so please choose windproof direct-strike lighters with caution. Try to use open flame or kerosene lighters as much as possible.

Two.Kerosene Lighter Instruction:

Note: The new kerosene lighter does not contain oil and must be refilled before use. We sell refill kerosene at our store in the accessories section.

"Fueling Steps：

1. Open the hood.

2. Engage the movement.

3. Invert the device, open the bottom cotton pad, or pour kerosene into the hole at the bottom of the cotton pad.

4. Refueling complete, insert the shell and it's ready to use.

5. Fill the tank to 8/10 full, do not overfill as it may cause spillage. The first time you turn on the stove, please be careful as there may be oil spillage that could cause the entire stove to catch fire.

 Special Reminder: Distributors should not refill the lighter oil if the lighter has not been sold or used. Refilling the oil first will cause the wick to become black, making it look like an old machine, which the customer will not accept. Additionally, refilling the oil without using it will result in a decrease in the ignition rate, making it difficult to light the lighter in the future.

 Important Reminder: The rust inside the case is a common and normal phenomenon. It is caused by residual chemicals from the surface processing. Additionally, in our daily use, we often insert and pull the device, and the rougher internal structure helps to secure the movement, preventing it from becoming too loose. Therefore, there is no need to specially beautify the internal structure of the movement. If the movement becomes loose during use, please remove it, lightly tap the side bottom of the movement, and then insert it back into the case.

Three. Charging Lighter

At present, there are two major categories of rechargeable lighter on the market: electric heating wire lighter and electric arc pulse lighter.

1. Charging the lighter takes about 2 hours, usually through a USB port. It can be charged with the same USB adapter as a mobile phone, car charger, and computer USB port. Some also have a built-in USB port for direct charging.

2. Generally, you can use 2-3 packs. Just charge it after the battery runs out, it's simple, convenient, and quick.