Packing method: 6*9 small pp bag/PCS, 50 Pack + keychain = English manual, a large number of can be customized as required.

Export to South America Middle East (Brazil, Russia, Middle East, Vietnam, Africa, etc....)

new quick copy remote control product description

Descriptions of Brand-new and Fast-copy Remote Control

i. Overview Overview

in the process of configuration and sales, many customers hope to have a general remote control to replace the original remote control, but such remote control has not come out yet. Our copy remote control can easily configure your remote control within 2 seconds as long as you meet the following three conditions.

In the configuration and selling process, most clients wish to replace the original remote control with a general remote control, while such remote control has not be developed. You may configure your remote control within 2 seconds if you meet the following three conditions:

condition 1. The original remote control can be used normally

Condition I: the original remote control may be used normally

condition 2. Clear the transmission frequency of the original remote control (see the following figure when the original remote control is disassembled)

Condition II: know the transmission frequency of original remote control (referring to the following diagram)

condition 3. The original remote control encoding IC is PT2262 PT2264 SC2262 SC2260 HS2262 2260 LX2262 2260 EV1527 PT2240 and some non-standard codes remote control.

Condition III: IC of original remote control is PT2262 PT2264 SC2262 SC2260 HS2262 2260 LX2262 2260 EV1527 PT2240 or without code.

2. Copy method Copying method

1. Clear operation before copying: Press the two remote control in the upper row of the copy type button at the same time (it must be pressed at the same time to be effective), see the LED light on, and then turn off, do not release your hand until the LED light flashes, which means that the reset is successful. After clearing successfully, press remote control push button, and the LED light is on and off.

Resetting before copying: press two keys on copying remote control at the same time until LED flicks, indicating the resetting is successful. After resetting, press the key of remote control, and LED will be off.

2. Copy: Please pay attention to the correct placement of the product before Copy. The original remote control and copy-type remote control should be placed on the desktop side by side. Press the handcuff remote control down arrow button with your right hand and don't let go. When the LED light turns on, it turns out, indicating that it has entered the copy state. Use your left hand to quickly press the corresponding remote control on the original button, see Mutual-duplicating remote control remote control LED light flash, the copy is successful, and multiple keys are copied in the same way.

Copying: place the product correctly before copying. Place the original remote control and copying remote control on the desk. Use right hand to press the copying remote control until LED is on - off, indicating it enters to copying status. Use left hand to press the key of original remote control. The fast clicking of LED of remote control indicates success in copying. The copying method is the same as for several keys.

3. Use tiny: if you accidentally remove the code of the copy type remote control, if you want to recover, press the two keys in the row at the same time and do not let go. See that the LED light turns off when it is on, don't let go until the LED lights keep flashing, indicating that the recovery has been successful.

Tips: if you reset the code of remote control and want to recover, press two keys until LED light flicks.

III. Technical parameters Technical parameters

1. The original remote control IC model that can be copied by this product is 2262 2260 1527 2240 and compatible IC, etc.

IC model of original remote control is 2262 2260 1527 2240 and compatible IC

2. No need to consider oscillation resistance and address coding. This product will be automatically compatible with oscillation resistance and address coding.

It is unnecessary to consider vibration resistance and address code. The project may be compatible to vibration resistance and address code.

3. IC of this product that cannot be copied, such as HCS 300 301 and compatible rolling code IC, etc.

The inapplicable IC is HCS300 30 and compatible rolling code IC

4. The battery used in this product is 3v 2032. Please replace the battery when the remote control distance is insufficient.

The battery used in the product is 3V and 2032. please replace the battery when the remote control distance is insufficient

5. This remote control is a fixed operating frequency, usually 315MHz;433MHz. Other frequencies can be customized

The fixed working frequency is 315MHz;433MHz; other frequencies may be customized.