【Product Name】Car Air Pump
【Material】Raw metal + plastic
Product Size: Length 15cm Width 7cm Height 11cm
【Packing Quantity】16 or 20 pieces per carton
【Weight】A model 1.1 kilograms, B model 0.65 kilograms, C model 0.45 kilograms
【Instruction】Operating Voltage: 12V-13.5V for vehicle useCurrent: 130W for vehicle useObject: Small to medium-sized tiresEnvironment: Empty or partially inflated tiresStop environment: Large amounts of water or liquid
Accessories include a 0.7M inflatable hose, three different air needles (suitable for different inflatable objects), a 280cm connection cable, and a colorful box.
【Usage Method】Remove the cigarette lighter plug, directly plug it into the car's cigarette lighter, turn on the air pump switch, wait for the air pump to start, then insert the air nozzle of the air inflow hose directly into the tire valve, when you hear the sound of air leaking from the tire, it indicates that the air has passed, you can tighten the air nozzle, and then you can inflate the tire. At this time, the air no longer leaks. When inflating, the instrument needle rises with the saturation degree of the tire. When the needle reaches the appropriate tire pressure (generally for passenger cars, the tire pressure is 223kpa=35PSI), remove the plug and air nozzle, and the work is completed. Please use the professional ball needle, connection mouth and air nozzle provided by this machine to inflate the ball, and other gas equipment.
【注意事项】
1. Please start the car engine before use to enhance the power supply, without consuming the car battery power.
2. This machine is limited to use a direct current (DC12V10A) power supply and cannot be used with household high-voltage power.
3. When inflated, please take a 10-minute cooling break after continuous operation to extend the motor's lifespan. For rubber boats, you can continue to operate for 30 minutes.
4. Generally, it takes about 3-6 minutes to reach a normal tire pressure of 220KPA when inflated. Large tires will take longer. If the gauge needle rapidly rises when starting to inflate, it indicates that the air has not been properly pumped into the tire. You must stop the operation and start over, or the gauge and motor may be damaged.
5. When using, do not leave the machine unattended, always pay attention to the tire pressure, and do not allow it to be too saturated.
6. If the car's ashtray is not clean and non-conductive, or if the fuse burns out, the machine cannot operate normally. Please ensure that the ashtray is conductive.
7. This machine should be avoided from moisture, heavy falls, and sand and mud intrusion. It should not be played by children to prevent damage.
8. If there is a stoppage during use, it is due to the insufficient current supplied by the cigarette lighter. Our products are shipped with a current detection of over 12A.
9. The machine starts with a large current. Please do not turn on the power switch when the tires are connected, or it may cause the car's fuse to burn out due to the excessive start-up current. The correct operation is to turn on the power first, wait for the air pump to start working normally, and then connect the tires to inflate. If you need to turn off the power and turn it on again during the operation, you should also remove the air nozzle before turning on the machine, as it may burn out the car's fuse.
This machine is suitable for the tires of cars, bicycles, and also for the air filling of sports balls, inflatable boats, and more.
Highways, open fields, or other places, when the car tire suddenly loses air, it can better play its emergency function. Prepare one and put it in the car trunk.
Maintaining the correct tire pressure in your car can save gasoline, protect the tires, and ensure road safety.
Note: Some air pumps claim to have a pressure of 300PSI, but this is merely to attract attention. In reality, they cannot reach such high pressures (20 atmospheric pressures), and the typical tire pressure is around 2.5 psi, which is roughly 150PSI.
