Double-Headed DIY Weaving Tool/Wool Simple Knit Device/Winding Rope Device Flower Basket Wool Ball Knit Device

 prepare tools first: rope braiding machine, small needle, wool
step 1: pass the wool through rope braiding machine and leave a thread outside.
step 2, start winding, circle around the metal thin stick,
                 then bypass the four thin stick in turn.
step 3: start braid rope. at this time, circle the line around the periphery of four thin stick and pass each thin stick in turn. every time i reach thin stick, i use that small needle to pick up the circle on the original stick and press the wire around. if i set thin stick, i will buckle four sticks in turn, so i will circle around, buckle in circles, tightly woven into a cobweb
pay attention to the process of weaving, often pull the thread at the lower end of rope braiding machine, you see the braided rope slowly spit out from the rope braiding machine.
step 4: close the end, cut the thread, and then wear it out of the four thin stick coils. wear it together to see that a rope is finally woven
the rope can be prepared at will according to the length you need. after weaving, it can be rolled into various shapes to give full play to your imagination.