The technical specifications of the swamp deer [HD511A] electric control system are as follows:

【一】Control circuit board technical requirements:
   
1. Dual-button control, press '+' to turn on, press '-' to decrease the gear, long press for 3 seconds to manually turn off.

2. Button Gears: 11-step control, pressing "+" once to turn on/increase brightness.

3. The device will automatically power off after a 5-minute standstill (enter into automatic sleep mode), and it has a memory function for automatic shutdown with motion detection (remembering the level used before automatic shutdown). Note: The motion detection components must be able to withstand 1500G of shock.

4. The control circuit board has a memory function for instant power loss (remembering the position used before the instant power loss).

5. Press and hold the "-" button for 3 seconds to manually turn off the control board. After manual shutdown, the motion calling function will not work.

【2】HD511A Power Supply System

1. Solar energy and CR2032 battery dual power supply.
Solar panels are used for power priority, and when solar power is supplied, the CR2032 battery is in a dormant state (not supplying power). When the solar panel power voltage is lower than the light-emitting diode (LED) usage voltage, the power will automatically switch to the CR2032 battery (Note: The switch must have a memory function, remembering all the control board functions and usage levels before the switch).
Solar panels: Reference the output voltage and current of solar panels from the technical specification book of solar panels.

Energy-saving System

The product operates on a CR2032 battery and has a medium brightness standby time of 30,000 hours.

【Four】 Lamp Bead Requirements and Service Life
Lamp Bead Requirements:
The light bulb is packaged with two types of divided styles for energy-saving light bulbs.
Difference requirements, 1: Two types of differentiation can be switched freely through the circuit board.
Dichotomous spot requirements: Differentiation ① A single center of light, single point size of 2 MOA,
Differentiation ② Central Point + Cross Circle
Dual-mode switch: Press '+' and '-' simultaneously to switch freely. Remember the previous brightness level when using the differentiation mode.