car first aid 500a reinforced battery clip

Car battery charging cable
A: Follow the cross-connect sequence:
1. First, clamp the red clamp to the positive pole of the non-electric vehicle, and then connect it to the positive pole of the electric vehicle.
2. Start by connecting the black connector to the negative pole of a vehicle with electricity, and then connect it to the engine hoist or negative pole of the vehicle without electricity.
3. Start the electric vehicle for a few minutes, then start the non-electric vehicle for a few minutes. If it still cannot be started, you can slightly increase the accelerator of the electric vehicle, and then try to start the non-electric vehicle.
4. Remove the cross-connected emergency line in the same order as the previous crossing of the sideline.

B: Black negative clamp should not be directly clamped on the negative pole of a vehicle without electricity, and it should not be connected or near the parts that may move or rotate when the engine is running.
When crossing the tow line, you must turn off the headlights, air conditioning, sound system, and computer devices of the dead vehicle.Product Introduction:
Car charging cable, used when the car battery is dead and the car cannot be started, to connect to another car for starting, or to connect to a charger for charging.nbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbspnbsp(3) Don't worry if your car won't start because of a dead battery. Just call a taxi and have it driven over to you. It's easy to fix with a simple clamp. Cars rarely run out of battery, but once in a while, it can really drive you crazy. It's better to carry a battery clamp just in case, so you won't have to worry about it.
【操作步骤】
1. Connect the red clamp head of the cable to the positive terminal of the dead battery.
2. Connect the other red clamp head of the cable line to the positive terminal of the good battery.
3. Connect the black clamp head of the cable to the negative pole of the good battery.
4. Connect the other black clamp head of the cable to the engine housing or the car body.
5. When starting, please complete the operation instantly, and there should be a 10-second cooling time between consecutive starts.
Step 6: Uninstall the cable line by following the opposite steps of the installation.
【注意事项】
1. Operate strictly in accordance with the operating procedures.
2. Check the labeled voltage of both batteries to ensure they are the same.
3. Turn off all loads in the car, put it into neutral, pull the hand brake, and start the engine. Do not smoke near the vehicle.
4. If the car battery is frozen, do not start the car, or it may lead to an explosion.
5. Please ensure that the battery wiring polarity is correct.
6. When operating, the car must not come into contact with other vehicles.
7. Car batteries can produce explosive gases! Wear protective goggles when installing cable lines.
8. If acidic substances leak from the battery and spill onto your skin or eyes, immediately rinse with a large amount of clean water and seek medical help. We supply a variety of specifications of car tow ropes, tow straps, strong tow ropes, nylon tow straps, and can customize the length and thickness. Our products have reliable quality and reasonable prices. Welcome to call for consultation and negotiation.