Weidmuller 1469510000 switch mode adjustable power supply unit PRO ECO 480W 24V 20A Weidmueller

Weidmuller 1469510000 switch mode adjustable power supply unit PRO ECO 480W 24V 20A Weidmueller
Type : PRO ECO 480W 24V 20A
GTIN (EAN) : 4050118275483
Depth : 120 mm
Height : 125 mm
Width : 100 mm
Net weight : 1,557 g
Storage temperature : -40 °C...85 °C
Operating temperature : -25 °C...+70 °C
Environmental Product Compliance
REACH SVHC : Lead 7439-92-1
Input
AC current consumption : 2,37 A @ 230 V AC / 5,2 A @ 110 V AC
AC input voltage range : 85...264 V AC (derating at 100 V AC)
Connection system : Screw connection
DC current consumption : 1,55 A @ 370 V DC / 4,65 A @ 120 V DC
DC input voltage range : 80...370 V DC (Derating @ 120 V DC)
Input Frequency range AC : 47...63 Hz
Input fuse (internal) : Yes
Inrush current : max. 5 A
Nominal power consumption : 527.5 VA
Recommended back-up fuse : 6 A / DI, safety fuse
16 A, Char. B, circuit breaker
6…8 A, Char. C, circuit breaker
Surge protection : Varistor
Output
Capacitive load : unrestricted
Connection system : Screw connection
Continous output current @ UNominal : 20 A @ 55 °C, 15 A @ 70 °C
Nominal output current for Unom : 20 A @ 55 °C
Output power : 480 W
Output voltage, min. : 22 V ~ max. : 28 V
Output voltage, note : (adjustable via potentiometer)
Overload protection : Yes
Parallel connection option : yes, max. 3
Protection against inverse voltage : Yes
Ramp-up time : ≤ 100 ms
Rated output voltage : 24 V DC ± 1 %
Residual ripple, breaking spikes : < 50 mVPP @ 24 V DC, IN
General data
AC failure bridging time @ Inom : > 20 ms @ 230 V AC / > 20 ms @ 115 V AC
Degree of efficiency : 91%
Earth leakage current, max. : 3.5 mA
Housing version : Metal, corrosion resistant
Indication : Green LED (Uoutput > 21.6 V DC), Yellow LED (loutput > 90 % IRated typ. ), red LED (overload, overtemperature, short-circuit, Uoutput < 20.4 V DC)
Power factor (approx.) : > 0.98…230 V AC / > 0.98…115 V AC
Power loss, idling : 5 W
Power loss, nominal load : 43 W
Protection against over-heating : Yes
Protection against reverse voltages from the load : 30…35 V DC
Short-circuit protection : Yes
Insulation voltage input / earth : 2 kV
Insulation voltage output / earth : 0.5 kV
Insulation voltage, input/output : 3 kV
Pollution severity : 2
Protection class : I, with PE connection
Contact load (NO contact) : max. 30 V DC / 1 A
Floating contact : Yes
Relay on/off : Output voltage >21.6 V DC/ <20.4 V DC, overload