Factory Direct Supply Electrothermal Furnace South Africa 2000W Double Burner Electric Furnace Heating Household Kitchen Small Appliances Hot Plate

Product Information:

power:1000+1000w 110/240v 50/60hz Material:Iron Heater:145+145mm QTY:5pcs Loadingquantity:20FT/2000pcs 40HQ/4600pcs product size:49x28.5x7.5cm color box size:49.6x9x30.2cm CTN size:50x28.5x62cm HS CODE:7321110000

product Display:

mini small electric furnace, cute and compact, easy to carry, is an indispensable good product for going out and office!

Operation rules

rotary electric furnace rotary knob switch, yes adjust the temperature of the electric furnace in 5 positions adjust the switch to the appropriate position to make the electric furnace reach the required temperature. Note that when not in use, please adjust the switch to the "0"/"off" position and unplug the plug.

Safety precautions

1. No one can take care of it when using it.
2. Do not touch the heating plate surface when heating.
3. Do not immerse the electric furnace in water or other liquids.
4. Electric furnace is used to cook food for heating. When cooking food, the utensils should be on the heating plate.
5. When the electric furnace is not in use, be sure to adjust the switch to the "0"/"off" position and unplug the plug.
6. When using, do not place other sundries within 30cm around the electric furnace to prevent danger caused by blocking ventilation.

[Product introduction]]:

this product is environmentally friendly without radiation! Suitable for families of pregnant women, children and the elderly. Please do not use induction cooker for the sake of your family and your health.

2. No waste gas, no electromagnetic radiation, energy saving and environmental protection. High and low temperature can be adjusted to 1-5 gear. Manual gear adjustment, automatic temperature control!

2. Flat bottom, can be heated after being put on, (except plastic products) do not pick the material! There are requirements for vessel size and capacity!

Warm reminder:

electric Furnace secondary use electric furnace needs to be opened3 gear dry burning for 3-5 minutes, at this time there may be a small amount of smoke, odor discharge, because the furnace surface protective layer encountered high temperature evaporation, this is a normal phenomenon, this phenomenon will not appear after use once.
Dear friends, electrothermal furnace does not pick a pot. Theoretically, any pot with flat bottom and high temperature resistance can be used. However, because the temperature control test of electrothermal furnace is the surface temperature of heating plate, relatively thick pots (such as casserole, stone pot, ceramic pot, tile pot) may not be burned at one time, that is, the power indicator light has been turned off before it is boiled (there is a time difference in temperature conduction). Then wait a little while and start working again, which will lead to slower driving. The water is not boiled and power light is gone out. It is not that electrothermal furnace is not working. In fact, the over-temperature protection device is working. Heating plate
power off automatically at a certain temperature, but heating plate continues to heat, which not only protects electrothermal furnace, but also saves electricity. During use, this phenomenon will occur sometimes, of course, the water will be heated until it is turned on. It will be used for the first time small amount of smoke produced, it will not exist after several times of use. If you are using metal cookware such as iron or stainless steel, the heating is very fast and the effect will be very good ~, electrothermal furnace is not heated to water at one time, it has temperature control protection, do not order if you mind