Henan Bangda Waterproof Material Co., Ltd., produces self-adhesive roofing waterproof and insulating membranes with a test report, complying with national waterproof membrane standards, for safe use. Product features:
1. Sunscreen, heat insulation, and light reflection: The surface temperature can be reduced by more than 20 degrees when exposed to the sun in summer, and the indoor temperature of the factory can be reduced by 6-12 degrees.
2. Waterproofing, rustproofing, acid-proof, corrosion resistance, UV resistance
3. Prevent roof aging, extend the service life of color steel roof factory more than 10 years, with beautiful appearance, and it is still possible to move around on the roof after construction is completed.
4. Effective rain noise isolation, particularly significant for steel structure factory roofs.
5. Corroded and leaky steel roofing does not need to be replaced.
6. Resistant to cold, unaffected by -40°C, with an outer aluminum layer for fire resistance and flame retardancy.
● Application Scope:
Usually suitable for the roof of steel structure factory buildings and other building top floors, insulating, waterproofing, sound insulation, anti-rust, damage repair, aging renovation: It is one of the more high-quality insulating and waterproofing materials. After installation, when exposed to the summer sun, it can reduce indoor temperature by 30%-40%, and the higher the temperature, the greater the cooling effect.
Add WeChat 18639026652 when needed.
Construction Safety Precautions:
1. During construction, the construction surface must be kept dry and dust-free, and the structure must not be loose. After pasting, it needs to be pressed to discharge the gas.
2. Please choose to construct at dawn and dusk during high temperatures, and do not expose it to direct sunlight.
3. The longer the time, the stronger the adhesive force, do not tear open after the work is completed.
4. Due to the different temperatures during transportation and use, the product experience may vary, but this does not affect the final waterproof effect. Please rest assured to purchase!
5. Not suitable for areas with water pressure.
6. Do not apply water during construction; maintain the base surface dry.
7. If the base surface is full of sand and ash, it needs to be cleaned thoroughly before construction. Otherwise, if it is full of sand and ash, how can it be said to have adhesive properties!
8. It is not possible to construct from the water surface, and it needs to be treated from the water side, otherwise the external surface will lose its function.
9. After construction, it cannot come into contact with water for 24 hours.
Rusty and leaky roof
The roof of the cement-paved building on the kindergarten unit is covered with an aging, leaking, and seeping felt, felt, and asphalt roofing material, with a full layer of
Waterproof and Insulation for Farm Building Roofs at Pig Farm
Glass roof waterproof and insulating
Factory Building Roof Waterproofing and Insulation
Cement surface building roof waterproof and heat insulation
Suitable for any roof waterproofing and insulation
Temperature Measurement Comparison Before and After Waterproof and Insulation Construction
Warehouse to pallet and dispatch
Color steel roofed factory building
The surface of the oil felt or felt is fully covered and pasted, with aging and leakage of rainwater seepage, above the asphalt rolling material.
Henan Bangda Waterproof Material Co., Ltd. produces color steel sheet roofing steel structure waterproof membrane, self-adhesive butyl waterproof and insulation aluminum adhesive membrane for roof, special waterproof membrane for construction sites, self-adhesive waterproof membrane for cement roof, factory building roof waterproof membrane, building steel structure renovation anti-corrosion waterproof membrane, width 1m x 30m, red, blue, gray, and silver.
Color steel sheet self-adhesive waterproof and insulating membrane, dedicated self-adhesive waterproof membrane for full-coverage roofing, metal surface corrosion-resistant waterproof membrane, can last over ten years.
A roof covered with rusty and leaky color steel tiles, cement-painted building roofs, aging and leaky felt sheets, and glass-covered roofs for waterproofing and insulation, with simple construction, no need for fire-baking or glue application, simply paste directly, and can last over ten years.
Application scope, suitable for electroplating, chemical, papermaking, ceramic, breeding, leather, dyeing and printing, high-temperature casting and other industries with severe corrosion, high waterproof and insulation requirements, such as color steel roof of factories, warehouses, and large shopping malls.
Please contact the customer service at 18639026652 for details of the specifications and colors.
