Instruction Manual

1.Check the battery: Ensure that the battery is charged and installed in the correct direction, such as in a flashlight.

2.When using a flashlight, choose the battery based on the requirements of the flashlight and the voltage, do not use randomly, to prevent the circuit board from being burned out, do not use different models and different voltages of batteries at the same time.

3.While in use, when the flashlight's brightness significantly changes, it should be turned off to prevent excessive discharge of the battery and to charge it in time; Pay attention to the battery's waterproof and moistureproof features.

Prevent falls, remove the charger after the indicator light changes to indicate that the battery is fully charged, and do not overcharge.

4.Batteries that have not been used for a long time should be fully charged and maintained, and it is normal to charge and discharge them once every three months or so to avoid chemical corrosion.

5.The inner wall of the lamp cup should be kept clean and should not be wiped with the hands or hard objects. To remove fingerprints from the lens, use a cotton swab dipped in lens cleaner to gently wipe it.

6.Do not leave the flashlight in direct contact with sunlight, water, chemicals, or corrosive gases for a long time, to avoid damage to the flashlight.

7.Non-professional personnel are not allowed to disassemble the flashlight to prevent damage to the circuit board.

Notes

1.Do not directly shine light into the eyes to avoid causing harm to them.

2.Please do not exceed the pressure limit, and the voltage should not exceed.4.2VPlease do not reverse the battery, or it will damage the circuit board.

3.Please make sure to identify the positive and negative poles of the charger when charging, and do not overcharge or overdischarge the battery to avoid damaging the battery's service life.(Charging time is usually5-8Hour.

4.When using a flashlight, check to ensure that all threaded areas are tightened without looseness, as this could result in either no light or only a faint glow.

5.Torches should be avoided from being placed in direct sunlight or high-temperature environments. After use, please remove the batteries and store them in a cool and dry place after fully charging.

6.The company's flashlight has the ability to withstand daily water exposure, and it usually doesn't have any problems after being exposed to rain. However, it is not designed for diving, so please do not take this flashlight diving or leave it in a water basin or bathtub for a long time.

7.To maintainOGasket (sealing ring) and thread rotation should be smooth, please check and adjust every year.2-3Apply Vaseline oil or similar product directly to the surface.

Charging Instructions

1.When the battery power is low, it should be replenished in time to avoid affecting the battery life.

2.Batteries should also be charged during the long-term storage period.