Quantity can be discussed in detail, add V: 18413371954

Brake Caliper Cover / Full Aluminum Alloy Material 3D Stereo Caliper Cover

Honda models: Civic, S1, S2, S3, Accord, Fit, 2011-13, Odyssey, CR-Z, (In addition to the above Honda models, other Honda models cannot be installed.)

Toyota models: Camry, R V4, Corolla, 2013 model Razze, Crown, Vios, Prius, 2013 model Toyota 86, Land Cruiser, Camry, Toyota Wish, (In addition to the above Toyota models, other Toyota models cannot be installed.)

Ford models: Focus, Fiesta, Mondeo-Titus, Kuga, Ford S-MAX, and Ecosport. (Other Ford models are not compatible with the installation except for the models mentioned above.)

Mitsubishi models: New ASX, Pajero, Lancer, Mirage, Outlander, Galant, and Outlander Sport. (Other Mitsubishi models cannot be installed except for the above mentioned models.)

Nissan models: Sylphy, Livina, X-Trail, Teana, Sunshine, Tiida, Patro, Verita, Pathfinder, Paladin, Odin, Paladin, (In addition to the above Nissan models, other Nissan models cannot be installed.)

Subaru models: Subaru BRZ, Subaru XV, Forester, Impreza, (except for the above Subaru models, other Subaru models cannot be installed.)

BMW 3 Series

Aluminum alloy car front wheel caliper cover/brake caliper/caliper cover/modification decoration/fake abalone/caliper set

Color: Yellow, Red, Blue.

Remark: This brake caliper cover can only be installed on the front wheels of cars, and it does not match the rear wheels. For specific vehicle models, please refer to the vehicle model introduction below.

Specification: Pair Pack (Front Wheel Brake Caliper Cover)

Material: Aluminum Alloy (The product is made of aluminum alloy, which is more heat-resistant and stronger than ABS plastic on the market!)

Brand: Brake Cover

Vehicle Type: Suitable for vehicles with original wheel rim sizes of 15 inches, 16 inches, and 17 inches. Only the original car's wheel rim specifications are used, not the modified ones. Modified rims can be installed as long as the original car had 15-17 inch rims. Note: Only the front wheels can be installed! The product does not have a 100% match with the brake calipers, so some installation may require trimming. Please be patient when installing.

Instructions: The brake caliper cover is one of the popular car accessories for customization. The installation process is not very complex. Simply attach the cover to the brake caliper of the front wheel using AB adhesive. We do not provide AB adhesive, so the owner needs to purchase it from a hardware store. Before installing, apply AB adhesive to the inside of the cover and then place it over the caliper. Once it's attached, wait for about 1-2 hours before you can drive. It takes 24 hours for the AB adhesive to completely dry, so please avoid strenuous activities during this time!

Regarding the question of which size of wheel hub the brake caliper cover can fit, our store believes that this issue cannot be explained.

1. We only produce wholesale products.

2. No experience in installing it myself.

3. Also, there have been cases where the same size has been processed differently by different craftsmen in different regions, with varying results!