【Product Model】:XGD-701

【Product Color】:Black, white, silver, carbon fiber

【Product Name】: Car Decorative Air Intake

【Product Size】: 25.5*16.5*4cm

【Product Weight】: Net Weight (Approx.) 182g, Gross Weight (Approx.) 245g

【Suitable Vehicle Type】: Universal Type

【Product Introduction】

·This product is designed for decoration purposes and is only used for decorating cars. It does not have the function of actual air intake.
·The product itself is mostly made of hard resin and cannot be bent.
Confirm the installation location before purchasing.

Installation Steps

Step 1. Adhere to the chosen location.
Please carefully paste once. If you peel off and re-stick, the adhesive strength will weaken, so please paste once.
In very low temperatures, use a hair dryer to heat the adhesive surface before applying the adhesive.
Press the adhesive surface again to ensure a complete adhesive bond.
Attention: within 24 hours after installation, the adhesive strength of the double-sided tape will weaken, so please avoid applying vibratory forces.
Or contact with water

【Before Use Please Read】

Please read before use!
· Please do not use in places where it should not be used.
· Follow the instructions for proper use. Any accidents, malfunctions, or damage caused by incorrect use are not the responsibility of the company.
· The stain, dust, wax, oil, water, and other contaminants on the adhesive surface of the product should be thoroughly cleaned before use.
【注意事项】

· This product is not heat-resistant, so please do not use it in places such as the hood that are hot.
·If the coating surface of the vehicle is weak or the surface is weak, pasting may damage the body if it is pasted.
·The product may peel off according to usage, please pay attention fully.
· Remove the product that has been applied for a long time, and according to the burning degree of the car, there will be traces left on the car body.
· Exposure to direct sunlight for a long time can lead to the loss of electroplating, fading, and surface cracks.
·The adhesive strength is very strong, and once it is pasted, it cannot be re-unveiled. If the product is removed, there will be traces of pasting, or the pasting surface may be damaged.
· Regarding the installation of this product, if there is any damage, deterioration, or breakage to the vehicle or the product itself, the company will not be liable for any such situations.
· Please keep it in a place where children cannot reach.