smart led human body small induction night lamp built-in a lithium battery rechargeable strong magnet with over-discharge protection

Intelligent LED Body Sensing Night Light, Built-in 500mAh Dual Lithium Batteries, 180-Day Battery Life with Overcharge Protection, Charging-Indicator Light, 0-Second Auto-On, CE Certification: TMC210120106-E

***** led night light - Human body intelligent sensing night light - Rechargeable night light - Dormitory night light - USB 5V charging night light - Wardrobe cabinet night light - Corridor head of the bed night light##

Our Advantages:

1. Our circuit is a patented technology, and the mainboard has protection functions, including overcharge and overdischarge protection, which can guarantee that it will not fail from the hardware. 2. Our human body sensing night light uses thermal release human probe technology combined with photocontrol technology, which can turn on in 0 seconds with high sensitivity...

3, Our batteries are 100% A-grade quality, ensuring superior quality! The products have received excellent feedback from our customers.

4, we will test it twice, test and test, and we will not let it go, almost no customer complaints.

We use only top-tier electronic components and LED lights, ensuring sufficient voltage and capacity, without compromising on cost.

Welcome to purchase! Thank you for your visit! Original factory stock, instant dispatch!

Kindly Reminder: We have independent intellectual property rights! Many products on the internet and in the market are infringing on our rights, and there is always a risk of being sued by us at any time!











One piece weighing 6.8KG

1、Digital circuit design, digital probe + microcontroller, standby current microampere level, ensuring long life.

2、Many products on the market use B-grade or C-grade batteries, and some even use second-hand batteries. However, we are dedicated to the Tianhua brand and only use A-grade batteries. This is the difference.In, one cannot always be greedy for cheapness.

3、Many products on the market are made with single-sided panels, which cannot effectively dissipate heat and do not have ground plane, leading to poor quality. We, however, use double-sided FR4 boards, which have larger ground plane areas and larger heat dissipation areas, making our products very stable and of much higher quality.

4、Many products on the market have omitted many components, such as batteries without protection boards, and the mainboards are cleanly devoid of filter capacitors. However, our products are well-made, with a full board using 5 X7R filter capacitors. Our design for battery short-circuit protection includes overcharge and overdischarge functions, ensuring safety and without radiation, which is good for the body!

5. All the LED light beads we use are original and genuine, with copper stands, color separation, and color rendering index over 80. Each light bead emits over 26-28 lm, ensuring a service life of 25,000 hours.

TMC210120106-E

The instructions of multifunction nightlight - TH002
1.The product does not require wiring, is easy to install, and can be widely used in bedrooms, wardrobes, cabinets, stairs, balconies, carriages, and other spaces with lighting needs.

2.If the environment is bright, the little night light will automatically enter the sleep state and not light up. At night or when the light is dim, when the person enters the 36 meter scanning area, the night lamp will automatically light up when it senses the body temperature, and turn off the light automatically after the person leaves 20 meters.If the person keeps moving within the range of the sensor, the light will always be on for 25 seconds.

3.Built-in high-quality polymer lithium battery, each product is equipped with a charging cable, charging with 5V USB charger, when charging, the charging indicator is red, generally charging for 2-3 hours will be fully charged, and the charging indicator will go out when fully charged. It means that it is fully charged.Special note: Because the battery is brand new when it leaves the factory, if it has not been charged, it may appear "not bright" when receiving the product, which is normal. So the first time you use this product, the battery must be fully charged before it can be used. In addition, the battery is used up during use, and you must remember to charge it in time.

4.The product accessory has a soft magnetic block. First, tear off the double-sided adhesive paper of the black one, and then stick it to the product base. Repeatedly kneading and pressing to make the product and the soft magnetic block tightly bonded. The thin one is an metal plate, and the installation method is the same as the soft magnetic block.The metal plate is generally installed in the place where lighting is needed and then the light can be attached to the metal plate.

5.The night light can be placed anywhere, multi-functional, installation methods are diverse, in addition to adsorption in the iron medium, but also can be hooked with nails or hooks, can also be hung up with rope and so on.

Dimensions: Round, Diameter 85mm, Height 23mm

TH002 Small Nightlight Instruction Manual

1. The product does not require wiring and is easy to install, making it widely suitable for spaces with lighting needs such as bedrooms, wardrobes, cabinets, staircases, balconies, and carriages.

2. If the environment is bright, the night light will automatically enter the dormant state and will not light up. At night or in low light conditions, when a person enters the 3-6 meter scanning area, the night light will sense the body temperature and automatically turn on. After 20-25 seconds, the light will automatically turn off when the person leaves. If the person is moving within the sensing range, the light will stay on.

3. The product is equipped with a high-quality polymer lithium battery. Each product is provided with a charging cable. It is charged using a 5V USB charger. When charging, the charging indicator is red. It will generally take 2-3 hours to fully charge. When fully charged, the charging indicator light will turn off, indicating that it has been fully charged. Please note: Due to the fact that the battery is brand new A-grade and has never been charged when it leaves the factory, it may appear to be "not lit" upon receiving the product, which is normal.You must fully charge the battery for the first time before using this product. Additionally, remember to charge the battery promptly once it runs out during use.

4. The product accessories include soft magnetic blocks, the black ones. First, peel off the double-sided tape, and then adhere them to the product base. Compress the product and the soft magnetic blocks repeatedly to ensure a tight bond. The iron sheet is the thin one, and the installation method is the same. The iron sheet is generally installed where lighting is needed, and then the lamp can be adhered to the iron sheet.

5. Night lights can be moved freely, with multiple functions and various installation methods. Besides adhering to metal plates, they can also be hung using nails or hooks, or even suspended with ropes, etc.