car anti-theft alarm with 2 two-way remoter controller 1500m remote control start

1500-meter remote control distance, two-way vibration alarm, remote control for cooling/heating

One-click startCar Anti-Theft Device

Function Parameters:

1. Vibration Alarm Range: 3500 meters

2. Ultra-long control range: 1500 meters

3. Automatic Defense (433.92MHz)

4. Sound and light security and silent boundaries, which can be set according to the environmental conditions.

5. Manual or automatic transmission

6. Temperature Engine Start Programmable

7. Turbine timer is programmable

8. Programmable remote alarm mode (vibration, sound, or both)

9. Shock Sensor Bypass Programmable (Activation Delay)

10. Remote Engine Start and Preheating

11. The engine automatically starts under the temperature setting and the alarm clock.

12. Remote engine start for gasoline/diesel vehicles

13. Daily Time Display and Alarm

14. Remote control display of vehicle interior voltage and temperature

15. Sleep Mode (Optional)

Packing Accessories:

1 x Host Module
2 x LT832 bidirectional remote control
1 x Reset Switch
1 x LED indicator light
1 x 2-way start-up alarm with wiring
1 x Antenna
1 x Six-Tone Horn
6 x black zip ties
1 x Function Manual + Wiring Diagram (English Version)
1 x Vibration Sensor Kit
1 x Relay
1 x SPY Standard Color Box

Packing Specifications:

1. Packing Quantity: 10 sets/case
Net weight: 8.8kg
Gross weight: 10.7kg
3. Packaging dimensions: 328*300*435mm

A set of specifications separately:
Weight: 1.2kg

2. Packing Size: 32*15*9cm

Use Tip: When triggered by various alarms, turn off the engine for 40 seconds. After the alarm is completed, the security system returns to the security state before the alarm. If it is triggered again or by other types of triggers, it will enter the corresponding trigger class alarm. After the defense, if a detection point is continuously triggered for a long time, the security system will only report for 4 minutes and then automatically stop the alarm. When other sensors are triggered, all detection points will be re-detected. If at this time, a detection point is still continuously triggered for a long time, another alarm will be reported for 4 minutes (at this time, the alarm information must include the newly triggered sensor and the sensor that was continuously detected).