car burglar alarm suit buzzer two-way lcd screen original car remote control key anti-theft indicator

Car one-button start 433.92MHz remote control

2.4G 12V Anti-Interference LCD Original Car Remote Key Anti-Theft System

Function Parameters:

1. Vibration Alarm Range: 1500 meters

2. Ultra-long control range: 800-1200 meters

3. Automatic Defense (433.92MHz)

4. Manual or automatic transmission

5. Temperature Engine Start Programmable

6. Turbine timer is programmable

7. Programmable remote alarm mode (vibration, sound, or both)

8. Shock Sensor Bypass Programmable (Activation Delay)

9. Remote Engine Start and Preheating

10. The engine automatically starts under the temperature setting and the alarm clock.

11. Remote engine start for gasoline/diesel vehicles

12. Daily Time Display and Alarm

13. Remote control display of vehicle interior voltage and temperature

14. Sleep Mode (Optional)

Packing Accessories:

1 x Car Dual-Direction Host
2 x LT836 bidirectional remote control
1 x Reset Switch
1 x LED indicator light
1 x Car Bi-directional Start-up Wiring
1 x Antenna
1 x Six-Tone Horn
1 x Remote Control Silicone Cover
6 x black zip ties
1 x Car Dual-Direction Instruction Manual (English Version)
2 x batteries
1 x Vibration Sensor
1 x Relay

Packing Specifications:
1. Packing Quantity: 10 sets/case
Net weight: 8.5kg
Gross weight: 10.5kg
3. Packaging dimensions: 328*300*435mm

A set of specifications separately:
Weight: 1.2kg
2. Packing Size: 32*15*9cm

Use Tip: When triggered by various alarms, turn off the engine for 40 seconds. After the alarm is completed, the security system returns to the security state before the alarm. If it is triggered again or by other types of triggers, it will enter the corresponding trigger class alarm. After the defense, if a detection point is continuously triggered for a long time, the security system will only report for 4 minutes and then automatically stop the alarm. When other sensors are triggered, all detection points will be re-detected. If at this time, a detection point is still continuously triggered for a long time, another alarm will be reported for 4 minutes (at this time, the alarm information must include the newly triggered sensor and the sensor that was continuously detected).