dispensing balloon glue point stiers seamless non-hurt wall xi character stiers wedding room wedding car stiers double-sided adhesive wholesale high viscosity adhesive stiers

A box of adhesive dots contains 1200 packets, and customers who purchase in bulk should order in multiples of 25.

Kindly Reminder: It is normal for the adhesive dots to be connected with each other in a very few cases. Due to the reasons of light and monitor display, the color difference in the images you see may be slightly different. This is unavoidable. The dimensions and weights are measured manually and may have slight errors. Please understand!

Product Specification: Each pack contains approximately 100 glue dots, with a diameter of approximately 10mm.
Usage: This adhesive can be used to attach balloons, nonwoven fabric petals, and aluminum foil balloon kits to the roof or walls, or for decorating wedding cars or pasting happy characters, etc. It is easy to stick and remove without leaving any traces! Suggestion: Be sure to apply the adhesive in one go when attaching the balloons, or it is easy to tear the balloons when pulling them down from the balloons. (Do not remove the glue with your fingers!)

This glue also has a huge feature: as long as the aluminum film balloon leaks, take a small amount and stick it on the balloon, it won't leak anymore. If the hole is large, stick more grains. You can try this on letters and numbers. This secret was discovered by the shopkeeper himself, and the effect is very obvious.
Dear customers, please read this before making a purchase: It is recommended to test the adhesive on a large area after returning home, starting with a corner. Based on our repeated testing and buyer feedback, there are four points to note: 1: The balloon should be kept perpendicular to the object to be adhered. 2: Remove the balloons adhered to the roof within 2 days! (It's easy to remove within this time frame) 3: The shopkeeper has tested repeatedly: Make sure to rotate when removing (holding the balloon like turning a screw or loosening a screw, generally 5-6 turns are enough) 4: If it is adhered to the wall (there are various types of walls, such as white-gray walls), there may be a phenomenon of peeling, you can solve this by sticking two glue beads to one balloon.