Product Description:

Name: Mini Polishing Machine, Nail Grinder, Wireless Charging Nail Removal Tool

Adapt to the grinding head shaft diameter: 2.35MM

Clamp Depth: 25MM

RPM: 5000-10000-18000 Three Gears

Power: 10W

Time of use: Run the device for one hour or more with no load in the third gear. If you need to use it for a long time, you can use it while charging.

Battery Voltage: 4.2V

Battery capacity: 300MA

Charging: 30 minutes to 80% full, 60 minutes to full.

Naked phone weight: 58 grams

Packing Information:

Single-piece packaging box is a color card neutral paper box.

Single set size: 22*13*3.5CM

Weight: About 0.35KG

Packing Quantity: 60 Sets/Case

Crate Size: 52*29*43CM

Accessories list:

1. 1 unit of the main machine

2. 2.35MM engraving needle, 30 pieces

3. Three pieces of stainless steel saw blades (22MM/25MM/32MM each 1 piece)

4. Diamond Saw Blades (3 pieces each of 16MM, 20MM, and 25MM)

5. Quenching and lengthening variable diameter drill bits 2 pieces (1.0MM/1.5MM each 1 piece)

6.2.5D engraving needle 1 piece

7.2.35MM handle shaft link 2 pieces

1 USB charging cable.

Charging Tips:

1. The electric grinder usually has about 50% battery charge when it is new, and it needs to be fully charged before the first use.

2. The charging port uses USB-TYPE-C, which is the same as the charging port for Android smartphones.

3. Please use a standard USB charger or a computer USB port to charge the electric grinder.

4. Do not cover the charger when charging to ensure good heat dissipation.

5. Battery level indicator: 1 light = 30% 2 lights = 31% to 70% 3 lights = 71% to fully charged

6. After being fully charged, the electric grinder will automatically turn off and turn off the light.

7. When not in use, it should be fully charged and stored, and charged once every six months.

Warm Tip:

This model of electric grinder has a smaller power, it is not a professional electric grinder, and it is suitable for small-scale carving and polishing fields.

Please do not place the electric grinder in a place with temperatures over 40 degrees Celsius.

Usage Method:

Install the grinding head:

1. Insert the grinding head into the clamp.

2. Use the matching hexagonal wrench to tighten the grinding head screw securely.

Star power-on usage:

1. Press the power button once to enter the first working mode, with a rotation speed of about 5000 RPM.

Press the power button again lightly to enter the second working state, with a rotation speed of about 10,000 RPM.

3. Press the power button again to enter the 3rd working mode, with a rotation speed of about 18000 RPM.

4. Press the power button once more to enter the shutdown state.

5. In use, the load display will show the load status in real time according to the situation.

6. Overload display, when the load is too large, the overload indicator will light up for 2 seconds, and the overload system will shut down to protect.

7. According to the current usage, users can grasp the load situation, please use within the overload range.

Product Display Image:

Product packaging reference image: