905jp152 human body intelligent led induction light strip original supply amazon hot selling cabinet light bed edge light strip

This product is suitable for bedrooms, nursery rooms, wardrobes, closets, cabinets, corridors, workshops, basements, garages, staircases, warehouses, roofs, doors, garage entrances, and other places.

Product Specifications

1. Sensing Method: Infrared Human Body Sensing

2. Induction Control: Built-in Light Sensor

3. Sensing distance: >3 meters

4. Sensing angle: 120 degrees

5. LED Life: Over 80,000 Hours

6. LED brightness: 250 lumens

7. Light color: White light/Warm light (selectable)

8. Working Current: 900 milliamps

Working Voltage: 5V

Battery Power: Uses 4 AAA batteries or rechargeable batteries.

11. Delay time: 15 seconds to 20 seconds

12. Temperature for use of the lamp: -10~50℃

13、Light Emitting Diodes (LEDs) Quantity: 60

14、Product gross weight: 170g

Switch operation:

"ON" is in a constant-bright state, and at this time, it does not have sensing capabilities.

"OFF" is in the closed state.

"AUTO" mode is the sensing state (it turns on the sensing operation when the surrounding environment is relatively dark).

Product Installation Method

1. Double-sided tape adhesive

2. Magnetic base

PIR Motion & light sensor: At dark place, it will light up automatically when you get into 10ft detection range, and auto go out 15 seconds after you get out of the range.

Suitable for stairway, drawer, under-cabinet, pantry, bedroom, wardrobe, workshop, bookshelf, attic, closet, basement, hallway, corridor, headboard, trunk lighting, etc.

Three modes

ON: constant lighting

OFF: turn light off

AUTO: 自动感应状态，当有移动时，在黑暗中自动亮起。

Compact motion sensor LED under cabinet light adopts high-bright Epistar 5050 LED light source, combining passive infrared (PIR) technology to detect motions.

In AUTO mode, it will automatically turn on when motion is detected in the dark and auto turn off for hands-free convenience.

Easy installation: Magnet and 3M adhesive tape, could be hung and stick-on. No tools, screws or nuts are required when installation.

Detection range: 10ft

LED life: Above 80000 hours

Delay time: 15 seconds

Input voltage: 5V DC

Brightness: 250 lm

Strip Length: 1m

Color Temperature: 3000K-5000K

Working temperature: -10 ~ 50℃

Motion angle: 120°

Notices

-The built-in photo sensor may not function in AUTO mode in direct sunlight or bright environments.

-Not waterproof, do not use it in any heavy humidity or low temperature location.

- Do not try to mount two lights too close together. They may interact with each other in AUTO mode.

PS: LED night light, motion sensor light strip,Touchable light strip, RGB light strip.Vibration-sensing light, solar-powered sensor light, touch-activated light strip, remote-controlled light, dimmable light, cabinet light, toilet light, reading light, wall light, sensor doorbell welcome system, etc.