Product Usage:

Protect the corners from wear and damage, making the 90-degree corners more obvious, the edges smoother, and fully protect the Yin-Yang corners, enhancing their strength. It is widely used in arched shapes, "
Arc-shaped, corner protection. For example:

Reduce corner wear.

Protect corners from impact.

Extend the service life of the corner.

Help corner to maintain good condition.

Product performance:

1. Metal corner protectors are composed of two central bar-shaped strips measuring 11mm wide, imported high-quality hot-dipped zinc steel belts, which are firmly bonded together with paper strips through special processing techniques. They not only resist rust for a long time, but also provide a strong and durable corner protection.
More able to protect the corner, making the corner straight and strong.

2. Suitable for joints at arbitrary angles, especially for preventing cracking at the ceiling corner, making the corner straight.

3. Metal corner protectors have a width of 52.4mm, and each box contains 30.8m in length. Compared to traditional corner strips, the amount of putty required is less, and the length can be cut as needed, resulting in less jointing and less waste.

Product Specifications:

Size: 50mm×30m

Color: Cream-colored

Packing: 1 roll/box

Product Substrate:

Paper tape adhered to zinc-coated steel or aluminum metal strips

Usage Method:

Measure the length of each side of the site, cut metal corner protectors vertically with scissors to meet the construction length requirements.

2. Apply joint compound to both sides of the corner, fold the metal corner trim along its center line, and adhere the metal steel strip side to the joint compound (the metal steel strip side should be adhered on the inside), squeeze out any excess compound,
Use a trowel to smooth the surface. When working at corners, metal corner protectors should not overlap, or it may affect the flatness.

3. After drying, apply a layer of joint compound on the surface, and if necessary, lightly sand with a fine sandpaper.