51LED solar flame lamp floor outlet lawn lamp outdoor induction lamp garden courtyard decoration landscape torch lamp

flame lights are divided into solar charging (solar charging)

12LED packing box size + outer box size product size, total length 52cm, size 7.5cm

1 packing box size 7.8 x7.8x21.8cm,150g, outer box size: 58*41.5 * 68CM 105PCs.

2 packing box size 10.5 x10.5x23cm, 275g, 120PCs.

4 packing box size 22 x13.5x13.5cm,500g, outer box size: 56.5*43 * 68CM 144PCs.

6 packing box size: 15 x18x22cm,720g, outer box size: 62.5*36.5 * 67CM 144PCs. 8 packing box size: 24.5 x14.3x25cm,1005G, outer box size: 51*43 * 67CM 144PCs

33LED packing box size + outer box size, product size: 10.5cm, total length 58.5cm

1 packing box size 10.5X10. 5x255cm 270g, outer box size 55X55X54CM, 50PCs.

2 packing box size 12.5X12. 5x325cm, 500g, outer box size 64X39X67CM, 60PCs 30 boxes.

4 packing box size 17. 5x17.5x25.5cm, 920g, outer box size 55X55X52.5CM,72PCS18 boxes.

51/72/96led packing box size + outer box size, product size 12cm, total length 79cm

1 packing box size: 12.5 x12.5x32.5cm 450g, outer box size: 64x39x67CM

2 packing box size: 18 x12.3x33cm 792G, outer box size: 64x5x35cm

4 packing box size: 21 x21x33cm 1515G, outer box size: 43.5x43. 5x68cm

instructions for use:
1. The battery is the positive pole facing inside (the side of the lamp holder), and the negative pole facing outside (the tail).
2. The switch is at the tail, the switch function bearing switch is the switch function, and the light switch is the dimming function.
II. Circuit board instructions
1. Our store torch adopts advanced constant voltage and constant current technology, which can effectively solve the requirements of LED torch for constant voltage and constant current.
2. Special tips: a. Do not use it over pressure, and the voltage should not exceed 4.2V B. The battery is facing forward, do not set it in reverse, otherwise it will burn plate c. Pay attention to controlling the temperature change of torch to ensure heat dissipation d. Do not open the circuit board for non-professionals.
3. Warranty description: no longer covered by warranty after opening or handling the circuit board.