[Product] Chromium body anti-collision strip electroplating strip
[Color] mirror silver bright surface Black
[Size] 3 M/5 m
[Material] soft plastic PVC galvanized plastic

the cross section is the middle thickness and the two sides are thin (Radian surface), and the Middle thickness is about 2mm.

[Installation instructions]]

1. Clean the place where the car body needs to be pasted thoroughly first. If there is oil or wax, wipe it clean with alcohol.

2. After tearing highlight strip back protective film, stick it carefully and then subtract the excess.

3. The temperature is below 20 degrees. We recommend that you use electric warm-air blower to heat the adhesive and paste it to obtain good results. Do not wash the car within 1 day after pasting.

(Due to different models, the data is for reference only. The actual measurement of the buyer shall prevail.