Search history
Clear allSearch by image
XDrag and drop an image here or upload an image
Max 5MB per image
UploadSign In | Join
Cable Pulling Trolley
The pedalo is connected to the "axle" via its rear tire, which is fixed to the gears within the pedalo gear. When the hand exerts force backward on the bike (by dragging), the rear wheel rotates backward, transferring force through the axle to the pedalo gear. The gears then drive the pedalo gear structure (spring or rubber band structure) to convert the kinetic energy from the hand into potential energy (for example, the rubber band stretching as it rotates or the spring compressing, etc.).
When the hand is released, the car loses one of the forces that maintain its balance, namely the increased friction between the rear tire and the ground due to the pressure applied by the hand on the vehicle.F1The grip or traction commonly referred to in China, the recoil gear releases potential energy in reverse through the shaft, and thus the shaft converts potential energy into function through rotation.
Due to the fact that scooters are typically designed with rear-wheel counter-rotation drive (i.e., the wheels rotate counterclockwise when viewed from the left), the scooter gear is designed with rear rotation energy storage (i.e., the wheels rotate clockwise when viewed from the left). Also, because the axle is fixed in a certain direction, as long as the energy stored by the scooter gear is sufficient (i.e., the rotation amount is high) and the static friction force between it and the ground is low, the scooter can move forward using the energy output from this "heart" of the gear.
-In simple terms, it is like the kickbike "remembering" the force you apply to it.





Update time:
TOP