Tile leveling tool

1. Introduction

Tile leveling tool is a specialized tool used to treat uneven areas on the wall surface to ensure that they are level with the tile surface. It is widely used in the laying of large areas of tiles to avoid the problems of protrusions and depressions that may occur during tile laying.4。

2. Usage Method

1. Clean the floor to ensure it is clean and smooth.
2. Prepare leveling agent and cement, mix according to the ratio specified in the instructions.
3. Pour the leveling agent onto the ground, and distribute it evenly with a scraping board.
4. Wait for the leveling agent to dry, then use a trowel to scrape the leveling agent to smooth the floor.
5. Place the tiles on the leveled ground, press them appropriately, and wait for the cement to dry.4。

3. Points for Attention

• Ensure that the tile surface is clean, free of dust, scratches, and color differences.
• The gap between the tile and the wall at the junction should be controlled within the width of the skirting board.
• Use a level to check the flatness of the tiles, ensuring that the error is within 3mm, and the height difference between adjacent tiles is within 2mm.
• During the process of tile adhesion, it is necessary to fix firmly, and the air-hole ratio should be controlled at no more than 5% of the total number, with the single piece of air-hole area not exceeding 10%.
• The width of the tile joints should be between 2mm and 3mm, with the joints evenly spaced and straight.5。