wireless tattoo power supply 2400 ma mini rechargeable battery tattoo machine power supply tattoo material

Working Voltage: 3.7V Lithium Battery 2400mAh

Output voltage: 13 adjustable levels, each level adjusts by 0.5V.

Output Current: Continuous Current 0.5A

Charging Voltage: DC 5V±0.2V

Charging current: 1000mA (Full charge in 2 hours with fast charging)

Usage: The battery has a protection function. Before using, charge the battery to activate it, then turn on the machine to work.

Power connector: Audio 3.5mm interface,RCA interface, DC interface

Working Parameters:

Working Voltage: 3.7V

Battery Type: lithium battery

Battery Capacity: 2400mAh

Output Current: Continuous Current 0.5A

Charging Voltage: DC 5V ± 0.2V

Charging Current: 1000mA

操作指南:

1. Press the switch button for about 2 seconds: Power ON. When the load is not connected, it will be turned off immediately after turning on the power to protect the power battery and low power consumption. The power supply will only be officially turned on when the power supply is under load. (Note: Each time you turn on the power, it will display the third file directly.)

2. Press the switch button briefly: pause the work. (If the power remains in the pause state for more than 5 minutes, the power will automatically shut down and enter a low power state.) Pressing it again will start the work normally.

3. Press and hold the switch button for about 2 seconds: power off.