220v high voltage 2835 flexible soft three-color rgb atmosphere silicone neon outdoor led light strip waterproof linear light bar

The option of purchasing 1 piece per meter (customizable) is not specified for bulk sales; retail is possible. Those options marked as “bulk sales” are sold in bulk. A roll of 100 meters is not available for retail. The list of light strip styles is incomplete. If you have other requirements, please contact customer service for custom customization. The light strip in this link is a 100-meter roll. Items cut off without opening the roll will not be refunded or exchanged due to quality issues. Only bulk rolls that remain uncut can be returned or exchanged without reason within seven days. Any 100-meter roll that has been cut will not be refunded or exchanged if there is no quality issue. The light strip is mainly for wholesale, so it does not include any accessories. For outdoor or humid environments, the connector and end need to be sealed with glue to prevent water ingress, and should not be left in water for long periods. Regular options are not recommended for use in wet environments. It is suggested that regular options be used no more than four hours a day. Options allowing long-term operation are recommended to be used no more than ten hours a day. It cannot be used continuously. It must not be operated electrically. When used suspended, it should be fixed about half a meter away. Do not pull the light strip forcefully, and avoid damaging it. The light strip should be installed on insulating materials; using conductive materials for fixation may cause short circuits. Do not subject the light strip to stress-induced deformation. It should not be installed in conductive or flammable/explosive environments, nor in sealed environments. It should be installed in a well-ventilated and heat-dissipating environment. The light strip can only be connected to a plug at one end. 220V light strips may exhibit flicker; if a flicker-free plug is needed, please contact customer service for custom production. The light strip cannot be installed in an aluminum groove, as there is no ventilation and heat dissipation within the groove. No warranty is provided for installation in an aluminum groove (except for those with adhesive backing). For models with adhesive backing, a separation distance and glue must be used for reinforcement. The light strip can only be cut from a full meter length; it cannot be lit as a whole. It must be separated and lit individually for testing. Liting the rolled version together may cause overheating and melting at the middle. The plug should be inserted into the core of the wire, not skewed (skewed insertion may cause tripping, leading to damage between the plug and light strip). If the light strip does not light up despite having positive and negative poles, the plug should not move; simply reverse the orientation of the plug to light it up. The light strip must be connected to a compatible plug to function properly. Using an incompatible plug or not connecting it may cause damage. Buyers should refer to this product page for installation advice. Any installation based on assumptions other than the product page instructions will be at the buyer's risk. The seller does not provide warranty. After use for a period, a compatible plug is required. Monochrome light strips require monochrome plugs, while multi-color light strips require multi-color plugs. They can perform full or slow flashing. Six-color light strips require six-color plugs for segment switching and movement. Seven-color light strips require seven-color plugs for overall color change. With a remote control, seven-color plugs allow remote selection of monochrome color-changing modes and adjustment of brightness and speed. Three-color light strips feature dual-colored light beads on the strip. Another color features a combined lighting effect. It requires a three-color plug for each section, plus a standard household switch (the switch is not sold). After connecting, simply turn on the switch to switch to a different color; multiple sections cannot change colors simultaneously.

The double-triangle watermark in the image is merely the store name, not a product brand.

The option of purchasing 1 piece per meter (customization available) is not specified for bulk sales; retail purchase is allowed. All options indicating bulk sales are for bulk delivery. A roll of 100 meters is not available for retail sale. The list of light strip styles is incomplete. If there are other requirements, please contact customer service for customization. The light strip in this link is a 100-meter roll. Items cut off without opening the roll will not be refunded or exchanged due to quality issues. Only bulk rolls that remain intact can be returned without reason within seven days. If the 100-meter roll is cut, no returns or exchanges are provided due to quality issues. Light strips are mainly sold in bulk, so no accessories are included. For outdoor or humid environments, the connector and end must be sealed with glue to prevent water ingress, and should not be left in water for long periods. Regular options are not recommended for use in wet environments. It is suggested that regular options be used no more than four hours per day. Options allowing long-term operation are recommended to be used no more than ten hours per day. Continuous operation is not allowed. Electric operation is not permitted. When used suspended, it should be fixed about half a meter away. Do not pull the light strip forcefully, and avoid damaging it. The light strip should be installed on insulating materials; using conductive materials for fixation may cause short circuits. Do not subject the light strip to stress-induced deformation. It should not be installed in conductive or flammable/explosive environments, nor in sealed environments. It must be installed in a well-ventilated area with good heat dissipation. The light strip can only be connected via a single plug. 220V light strips may exhibit flicker; if a flicker-free plug is needed, please contact customer service for custom production. Light strips cannot be installed in aluminum grooves, as these lack ventilation and heat dissipation, and no warranty is provided (except for aluminum groove models). Back-adhesive models require separation and glue reinforcement. The light strip can only be cut from an entire meter; it cannot be lit as a whole—it must be separated and lit individually for testing. Liting the rolled version causes temperature buildup, leading to melting in the middle. The plug should be inserted into the core of the wire, not skewed (skewed insertion may cause tripping and damage to both the plug and light strip within one meter). Light strips with positive and negative poles usually do not light up when installed normally. If the plug remains unchanged, reverse the orientation of the light strip plug to light it up. The light strip must be connected to a matching plug to function properly. Using an incorrect plug or not connecting it may cause damage. Buyers should refer to this product page for installation advice. Any installation based outside the page’s instructions will be at the buyer’s risk. No warranty is provided by the seller. After use for a period, a matching plug is required. Monochrome light strips need monochrome plugs, while multi-color light strips need multi-color plugs. They can operate in full flash or slow flash modes. Six-color light strips can operate in segment switching and running modes. Seven-color light strips can change color entirely. With a remote control, seven-color plugs allow remote selection of monochrome color-changing modes and adjustment of brightness and speed. Three-color light strips feature dual-colored LEDs on the strip. Another color features a combined lighting effect. It requires a three-color plug for each section, plus a standard household switch (the switch is not sold). After connecting, simply turn on the switch to switch to a different color; multiple areas cannot change colors simultaneously.