du zinc household hand-held portable mini manual sewing machine hand-held pocket outdoor travel cross-border small sewing machine

Product Name: Mini Handheld Sewing Machine

Packing Quantity: 200 pieces

Product weight: 100 grams

Single box specification: 11*7*4CM

Crate Specification: 43*37*46CM

Color: Red, White, Blue, Random Three Colors

Please contact customer service personnel if you need to order by color. We ship in full boxes, 200 pieces per box, in plain packaging.

Dear, please send the whole case!

Manual Mini Sewing Machine Correct Usage Method:

1、Holding the device: Hold the machine base with the four fingers of your right hand, with your thumb naturally resting on the top cover of the machine, to hold the entire machine steady.

2、Threading: Gently pull the thread from the spool. Then pass it through the guide coil. Temporary place the thread end next to the machine needle, and then pass the threader through the needle hole from the front of the machine (towards the body junction). Then, lead the thread end into the small hole of the threader, and withdraw the threader, pulling the thread head out about 2-3 centimeters. Press the thread onto the pressing plate to use it.

3、Unfold the cloth:Use the index finger of your right hand to lift the press plate, place the fabric (thickness no more than 0mm) that is ready to be sewn flatly under the press plate, and gently replace the press plate to press the fabric;

4、 Sewing Operation:Hold the fabric with your left hand, and press down the upper cover with your right thumb gently until it is fully pressed. Then press down again, and repeat this process. The feeding mechanism will automatically move the sewn item to the left. With your right hand, move the sewing machine gradually to the right, and the left hand should hold the fabric and move the sewn item gently to the left in sync with the sewing rhythm until the sewing is complete. Cut the thread with scissors, gently pull up the press plate to remove the fabric. From the back side of the sewn fabric, pull out a section of thread at the end, and thread it through the adjacent loop to tighten and tie a knot, securing the stitch. When sewing is complete, do not pull the fabric hard to break the thread, to avoid damaging the sewing needle or stitches.

6. This function can automatically feed the fabric and adjust the tension between the stitches.But pay attention to the following points: if the needle is too tight, adjust the pressure nut slightly counterclockwise; if the needle is too loose, adjust the pressure nut slightly clockwise; make sure the needle is tight. If you need a larger needle, you can pull the cloth slightly faster with your left hand. If you need a denser needle, you can pull the cloth slightly slower with your left hand;

7、Change Line GroupIf you replace the large spool with a larger one, you can connect the spare extending rod to the spool shaft and insert the larger spool. Place the spare plastic cap at the end of the rod to fix the larger spool, and then re-thread the line, adjust the tightness of the line, and then sew; the effect of using cotton or synthetic thread.

8. Change NeedleLoosen the fixed screw and remove the broken needle. Replace the new needle, making sure to align the flat side of the needle with the fixed screw, and do not install it backwards. This pocket-sized, manual-operated sewing machine features automatic fabric feeding and the ability to adjust the tension between stitches, providing professional results.