Search history
Clear allSearch by image
XDrag and drop an image here or upload an image
Max 5MB per image
UploadSign In | Join
X Email Mobile
| european standard | ¥0.0 | 283 piece available |
|
| american standard | ¥0.0 | 300 piece available |
|
A new item has been added to your Shopping Cart. You now have items in your Shopping Cart.
Yiwu Laier Tattooing Co., Ltd. 4yr.
Contacts:Mr.DengChat
Mobile:86-18006509569
E-mail:2068064788@qq.com
Source manufacturer of embroidery dragon tattoo tools
|
| Ten thousand-level dust-free workshop, automated standard production |
Performance Parameters:
Charging Adapter Input Voltage: 100-240V AC 50~60Hz
Charging Adapter Rated Power: 10.0W
Maximum Output Voltage: 8.4V
Lithium polymer battery: 7.4V 760mAh
Net Weight: 175g
Volume: 149*47.6*33.7mm
Outer needle travel: 0-0.38mm
Outer needle length: 3.3mm
Functional Usage Instructions:
1. Power Switch: Press the power switch button lightly to turn on the machine when you install the battery or plug in the adapter, and then press lightly again to turn it off. The machine defaults to the fifth level when it is turned on, and the green light indicates.
2. Green Cycle Button: Pressing this button once briefly will shift the gear once. The first gear is the slowest with a blue light indicator, and the fifth gear is the fastest with a red light indicator. The gear range is cycled by the machine, starting from the 5th, 6th, 7th, 8th, 9th, 1st, 2nd, 3rd, 4th, 5th, 6th, 7th, 8th, 9th, 1st, 2nd, 3rd, 4th, 5th, 6th, 7th, 8th, 9th, and then back to 5th, 6th, 7th, 8th, 9th, 1st, 2nd, 3rd, 4th, 5th, 6th, 7th, 8th, 9th, 1st, 2nd, 3rd, 4th, 5th, 6th, 7th, 8th, 9th, and so on. Adjust the gear to suit your required speed.
3. This tattoo machine is equipped with a base, which has a magnetic control switch. When the machine is in operation, placing it on the base will stop the motor, and the RGB indicator lights will flash alternately. When you pick it up and move away from the base, the machine will automatically start working.
4. Battery Charging: Connect the charging cable to the battery and insert the USB plug into the charging adapter. The charging indicator light turns red, and when fully charged, the light turns green.
5. When the battery voltage is lower than 6V, the red LED flashes, and the other LEDs do not work. The motor does not output power, and the same output method will occur if the motor is overloaded.












Update time:
TOP