Here are the instructions for using **Pressure-Sensitive Pad**, condensed to less than 300 words:
1. Clean the surface to be protected with a damp cloth.
2. Peel off the protective film from the pressure-sensitive pad.
3. Press the pad firmly onto the surface to be protected.
4. The pad will adhere to the surface and provide a protective layer.
5. Remove the pad when no longer needed.
Please note that the pad is not reusable and should be discarded after each use.
---
### **Usage Steps
1. **Surface Treatment**: Ensure that the container opening is clean, dry, and free from oil or dust. It can be wiped with alcohol and allowed to dry.
2. **Adhesive Pad**: Peel off the release paper on the back of the pad, align the adhesive side down over the bottle opening, and lightly press to secure the center position.
3. **Even Pressure**: Press the glue layer from the center to the edge with your hand or a pressing tool (such as a roller), to remove air bubbles and ensure complete adhesion.
4. **Allow to Cure**: Allow the glue to sit for 5-10 minutes (some fast-drying glues may not require waiting), to achieve optimal bonding strength.
---
### **注意事项**
- **Compatibility Test**: Confirm the gasket size matches the bottle opening before first use to prevent seal failure due to size discrepancies.
- **Pressure Control**: Avoid excessive pressure when applying to prevent glue overflow or gasket deformation.
- **Environmental Requirements**: The recommended operating temperature is between 10℃ and 35℃, as high humidity may affect the adhesive performance.
- **Storage Conditions**: Unused gaskets should be stored in a sealed container in a cool and dry place to prevent the adhesive surface from oxidizing and becoming ineffective.
---
### **Common Issues and Solutions**
1. "Adhesion is not firm": Check the cleanliness of the bottle mouth or replace the gasket with a high-adhesive glue.
2. **Residue of Adhesive Layer**: Choose gaskets with low residue formulas, or use alcohol to wipe away residual adhesive.
3. **Edge Curl**: Apply pressure again and extend the resting time, or replace the gasket material with greater elasticity.
---
### **适用场景**
- **Personal Care Products**: Packaging for lotion bottles, spray cans, etc., which require rapid sealing.
- **Electronic Components**: Dust-proof and moisture-proof precision equipment sealing.
- **Food Packaging**: Short-term freshness preservation and sealing of dried goods and seasoning bottles.
**Tip**: Pressure-sensitive pads do not require heat sealing equipment, making them suitable for small batch or manual operations. They support customizing the thickness and the type of adhesive!
