thoracic and lumbar support chest and waist injury chest and waist fixator low temperature thermoplastic sheet

【Product Sales】: A box contains 10 pieces.

【Product Size】: S. M. L. XL.

Product Weight: S-XL, approximately 1.1-1.5kg

【Product Name】: Chest and Waist Immobilizer

【Product Certificates】: The product certificates are complete, with medical insurance coding.

The heater needs to be purchased separately.Default shipping is unshaped. If you need shaped products, please confirm with the customer service in advance.

appearance

Specific Operating Procedures:

1. Turn on the heater and plug it into the power source (220V), then turn on the heater switch.

2. After the heater has preheated for 5 minutes, remove the front piece of low-temperature thermal plastic board from the external fixation sleeve and place it in the heater. Close the cover and heat it for 3-4 minutes, then it can be removed.

3. Have the patient lie on their back with their face up. Place the softened low-temperature thermal plastic board on the patient's body to shape it. It will take about 3-5 minutes to set. (Note: First, lay a towel on the patient's chest and waist, then place the softened low-temperature thermal plastic board on the patient's body to shape it to avoid burning the patient. The lower edge of the front piece of the low-temperature thermal plastic should align with the 2cm above the pubic bone, press the shape with your hands, and ensure that the thermal plastic board is tightly fitted to the body without any gaps.)

Step 4: The operation for the back piece is the same as for the front piece. Be sure to spread a towel to prevent scalding.

5. Put on the assembled protective equipment on the patient. Note: First, secure the tension belts on both sides, then adjust the shoulder straps. Finally, adjust the reinforcement straps to the appropriate fit, and fix them with the magic buckles to support the spine and body. Confirm the wearing condition and comfort.

......................................................................................................................................................................................................................................................................................................................................