electric iron small mini electric iron household iron dormitory facial line filler pressing machines handheld garment steamer portable

Note: Please contact customer service before shooting.

Dormitory student electric iron DIY mini ironing iron for Beading Bean, special electric iron for Beading Bean

Product Name】Travel-style Mini Iron

【型号】：IM-818
【Product Size】16.8*6.8*9.7cm
【Individual Packaging Size】: 17.8*10*11cm

【Single Product Net Weight】：0.39kg
【Crate Size】: 42.5*37*36cm
【Gross Weight of the Whole Case】: 11.5kg
【Packing Quantity】: 24 pieces
Cable length: 1.2M
【Product Power】: 460W
【Product Features】Adjustable temperature settings, upright placement
【Product Accessories】Plastic Bubble Bag, Instruction Manual, Power Label

The correct usage method of a steam iron:

1. Before use, the yellow-green dual-colored wire in the power cord should be grounded to prevent the risk of electric shock in case of a leakage.

Dangerous.

2. Lift the front end to make the water filling port face upward, and slowly pour boiling water from a measuring cup into the port.

The amount of water can be determined according to the capacity of the iron's water reservoir.

3. For an iron with a water level glass, you can stand the iron upright and observe the level of the water in the reservoir.

Add water as needed.

4. On the fabric indicator label of a steam iron, the labeling of fabric names is essentially the same as that of a temperature-adjustable iron.

The same. The difference is that an additional "steam" mark is added.

5. Turn on the iron and adjust the temperature control knob to a position between "Wool" and "Cotton" settings.

The indicator light should illuminate. When the indicator light goes out, it means that the iron's baseboard temperature has reached the desired value.

If the iron is filled with water, there should be steam 'spraying' to allow ironing.

6. You can use a steam iron for dry ironing. The method is to adjust the temperature according to the type of fabric you are ironing.

Adjust the control knob to select the appropriate substrate temperature. After that, adjust the steam knob to the '0' position.

7. After use, you should drain the remaining water from the reservoir through the filling port, and when pouring, ensure that the iron's front end is facing down.

Simultaneously shake the electric trade pot, and the water can be poured out. Then, adjust the temperature knob to the highest temperature setting, and turn on the power for several

Allow the internal moisture to completely evaporate. Then turn off the power, and rotate the temperature control knob back to the lowest temperature setting.

Keep it after it cools down naturally.

Four methods for removing stains from an iron daily:

When ironing clothes, due to excessive temperature or improper operation, often causes the smooth bottom to become contaminated with dirt.

Effect on ironing clothes.

Detergents:

① Apply a small amount of toothpaste to the dirty area, then use a clean cotton cloth to wipe vigorously, and the dirt can be removed.

The iron is heated to about 100°C after being plugged in, then the power is turned off. Use a cloth soaked in vinegar to rub the dirt surface several times, and then wash it with clean water.

③Turn on the iron and heat it to about 100°C, then turn off the power. Apply a small amount of baking soda to the dirty area, and then wipe it clean with a clean cloth; the dirt will be removed.

④ For severely dirty floorboards, polish with a cloth dipped in polishing paste to protect the electroplating layer.

Mini Ironing Iron DIY Handcraft Ironing Iron for Beading Puzzle