● Product Features:
1. Sunscreen, heat insulation, and light reflection: The surface temperature can be reduced by more than 20 degrees when exposed to the sun in summer, and the indoor temperature of the factory can be reduced by 6-12 degrees.
2. Waterproofing, rustproofing, acid-proof, corrosion resistance, UV resistance
3. Prevent roof aging, extend the service life of color steel roof factory more than 10 years, with beautiful appearance, and it is still possible to move around on the roof after construction is completed.
4. Effective rain noise isolation, particularly significant for steel structure factory roofs.
5. Corroded and leaky steel roofing does not need to be replaced.
6. Resistant to cold, unaffected by -40°C, with an outer aluminum layer for fire resistance and flame retardancy.
● Application Scope:
Usually suitable for the roof of steel structure factory buildings and other building top floors, insulating, waterproofing, sound insulation, anti-rust, damage repair, aging renovation: It is one of the more high-quality insulating and waterproofing materials. After installation, when exposed to the summer sun, it can reduce indoor temperature by 30%-40%, and the higher the temperature, the greater the cooling effect.

WeChat is the same as the phone number; 15725773228

Construction base working conditions requirements:

1. The base surface of the color steel sheet is free from dust and loose parts. After the loose parts are treated, construction can be carried out.

Construction Technology

1. Clean the base surface:
Wipe off the dust on the color steel roof with a mop. If there is any rust, it must be removed to achieve a smooth and clean surface.

2. Make an additional layer:

The additional layer should be applied at the corners, ventilation openings, and gutters, with a width of 15cm to 30cm. It should be extended along the central axis of the corners to be pasted.

3、Large-area construction:

A: First, draw a baseline to ensure that the rolled material is laid out neatly and beautifully.

B: When applying the membrane, align the sheet accurately at the intended construction site, starting from the water flow direction towards the downhill. For vertical surfaces, apply from the bottom towards the top.

C: Exclude air, roll the membrane to press out the air inside, and firmly adhere the membrane.

D: On the color steel sheet nail cap, The nail cap can be cut into small pieces and pasted with tape. For the repair of the old roof with local leakage, the local construction can be used for adhesion.

E：The overlap length of the membrane is 5cm.

FWhen nailing the sheet, it is not easy to pull the sheet too tightly. It is necessary to loosen the sheet to avoid applying too much force to the sheet on the nail cap.

 4: Local Construction

For the local construction such as the overlap areas of color steel sheets, gutters, fans, and light wells,

Use self-adhesive tape to cover the joints of the color steel roofing, the gutter, the fans, the light well, and other key areas.

The nail cap can be cut into small pieces and pasted with tape. For the repair of the old roof with local leakage, the local construction can be used for adhesion.