workshop roof heat insulation waterproof coiled material colored steel tile roof heat insulation insulation material customized heat insulation coiled material heat insulation

● product features:
1. sun protection, heat insulation, reflected light: the surface temperature can be reduced by less than 20 degrees when the sun is exposed in summer, and the indoor temperature of the workshop can be reduced by 6-12 degrees.
2. water resistence and leak repairing anti-rust, anti-rain and acid, anti-corrosion, uv protection
3. prevent roof aging, prolong the service life of colored steel tile factory building for more than 10 years, and have beautiful appearance. after the construction is completed, you can still move on the roof.
4. effectively keep out the sound of rain, especially the steel frame workshop roof.
5. no need to replace the colored steel tile roof rust vulnerability.
6. cold resistance, minus 40 degrees will not be affected, and the outer aluminum layer is fireproof and flame retardant.
● application scope:
generally applicable to steel frame workshop roof and other buildings top insulation, water resistence and leak repairing, sound insulation, rust prevention, damage repair, aging renovation: it is currently a relatively high-quality insulation water resistence and leak repairing material. after installation, when exposed to the sun in summer, the indoor temperature can be reduced by 30%-40%, and the higher the temperature, the greater the cooling.

wechat same account; 15725773228

requirements for construction base operation conditions:

1. colored steel tile the base surface is free of dust and looseness. g construction after loose part treatment

construction technology:

1. clean the base surface:
use mop bar to check the dust on colored steel tile. if there is rust, it must be removed to make it smooth and clean.

2. make additional layers:

additional layers shall be made at yin-yang angle, vent, gutter, etc. the additional layers shall be 15cm30cm wide and extended along the central axis of yin-yang angle.

3. large-area construction:

a: first play the baseline, so that the coiled materials posted are neat and beautiful.

b: when laying coiled materials, align the square coiled materials at the part to be constructed and start paving from the downhill direction of flowing water. the vertical wall is paved from the lower direction to the upper direction of the elevation.

c: remove the air, press the air in the coiled material along with the rolling of the coiled material, and put the coiled material firmly.

d: on the colored steel tile nail cap,the tape can be cut into small pieces and pasted at the nail cap. local construction can be used for repairing old roofs with partial leakage.

e: the lap side length of coiled material is 5cm

f:when the coiled material passes through the nail cap, it is not easy to pull the coiled material too tightly. loosen the coiled material and try to make the coiled material on the nail cap free from too much force.

 4: local construction

for local construction such as colored steel tile overlap, gutter, fan, and light well,

that is, use self-adhesive tape to stick key parts such as colored steel tile overlapping parts of roof, gutter, fan, light well, etc,

the tape can be cut into small pieces and pasted at the nail cap. local construction can be used for repairing the old roof with partial leakage.