lapic transparent color car sealant car silicone sealant transparent color gasket free sealant silicone

Product Instructions:

Sealant is produced using advanced manufacturing processes and technologies. It is a one-component product with high sealing strength, excellent heat resistance, long-lasting weather resistance, no sagging when applied to vertical surfaces, good oil resistance, no corrosion, no irritating gases, no shrinkage of the cured material, easy peeling of the sealant, and is environmentally friendly and non-toxic. It is not limited by the size or shape of the bonding surface. It can replace various rubber pads, asbestos pads, cork pads, and paper pads, effectively preventing water, oil, and gas leakage, and provides excellent sealing and leak prevention performance.

Scope of Application:

This rubber can replace various rubber pads, asbestos pads, cork pads, and paper pads. It effectively prevents water, oil, and gas leakage and provides excellent sealing performance. It is suitable for flat sealing in engines, gearboxes, fuel tanks, mechanical and electrical equipment, electrical appliances, instruments, electronic, and chemical equipment of machinery, vehicles, motorcycles, tractors, and ships, as well as sealing of pipe fittings and cover plate joints.

Instructions for Use:

1. Remove moisture, dust, oil, rust spots, and other contaminants from the surface of the material to be bonded;

2. Use a cap to pierce the nozzle, then apply the adhesive evenly from the outer edge to the inner edge to achieve a thickness of approximately 1.6–3.2 mm, resulting in good sealing performance;

3. After applying the adhesive, approximately 10–20 minutes later, when the adhesive film begins to react, align the two sealing surfaces and apply pressure until they are tightly bonded.
4. Keep at room temperature of 25°C for 10 hours or after 24 hours, the sealing effect is excellent;
5. For unused colloids, seal the tubes properly after use. Wash hands with clean water and clean the tools thoroughly. Precautions: 1. Maintain ventilation in the workplace to prevent children from accessing them.
2. Wear leather gloves during operation. If it touches the skin or eyes, immediately wash with clean water or seek medical attention;
3. Store in a cool, dry, well-ventilated place away from high temperatures;