titanium steel necklace female non-fading clavicle chain simple rose gold south korea japanese and korean short student fresh all-match jewelry

If you buy genuine products from renowned brands, as long as they are properly maintained, they will remain bright and new for several years. These types of jewelry do not require the use of very expensive care solutions for maintenance; it is sufficient to avoid acidic and alkaline environments and humid conditions.

Moisture-prone environments include: not wearing the when bathing, washing your face, or sweating heavily; before storing, use a dry cloth to wipe it dry; in the jewelry box for storing jewelry, there should be a dry agent; for simulated jewelry, it should be immediately placed in the jewelry box when not being worn.

1. Jewelry should be changed frequently. It is best to have multiple pieces of jewelry to replace each other often, especially in hot summer, as the plating on jewelry can wear off easily when in contact with sweat for a long time.
2 Contact with chemical substances, jewelry is easy to be damaged. The fragrance during bathing, chlorine in swimming, and salt in the sea can all cause etching on the jewelry plating, so it is best to remove all jewelry before bathing or swimming.
3 Collisions are easy to scratch, and storage should be careful. Do not stack jewelry together, and it should be stored in the original packaging bag or in a jewelry box with independent small compartments to avoid scratching the surface by rubbing against each other.
Clean jewelry at any time, use a soft and fine bristle brush to sweep and wipe the surface of the jewelry to remove surface dirt.

Anti-wear, anti-scratch

Do not place or wear with other jewelry, to avoid collision and friction, causing cracks and scratches.

Anti-collision, anti-bumping

The crystal surface is as bright as a mirror, and it should be avoided from losing its luster due to sweat, grease, and dust. After wearing jewelry, you can gently brush it with mild soap water and a soft brush, which is the simplest and most convenient cleaning method. You can also gently rinse the jewelry with water. After cleaning, place the jewelry on a towel without cotton to dry. For large ornaments, you can place them in a safe place. If there are dusts, you can use a cloth without fur to gently brush away the dust, or you can also rinse them directly with water, and then place them in a shady place to dry naturally. The hardness and brittleness of crystal are high, so it cannot be hit hard or dropped from a high place, and it should not be subjected to heavy pressure to avoid breaking. When moving large crystal ornaments or vessels, you should hold the base or the entire crystal ornament, do not just grab the top and the outer parts of the crystal.

Corrosion Prevention

The properties of crystal are actually very stable, but the properties of fractures or other associated minerals can change. Therefore, it is best to avoid contact with strong acids, strong bases, and other chemical corrosive substances, or these chemicals will corrode the crystal or other minerals along the cracks.

Anti-high temperature

Do not suddenly immerse crystal jewelry into hot water, as high temperatures can easily cause large cracks or fading, leading to unnecessary damage. Amethyst jewelry should be avoided from high-temperature heating and radioactive radiation to maintain its color and luster as it was. Crystal jewelry should also be avoided from direct exposure to strong sunlight or direct light, to prevent fading. Crystal jewelry placed in jewelry display cabinets should not be exposed to strong light for a long time, otherwise, crystal with inclusions may lose water, and colored crystal may fade.