factory roof thermal insulation materials customized thermal insulation coiled material thermal insulation roof thermal insulation waterproof coiled material colored steel tile

●Product Features:
1. Sun protection, heat insulation, and light reflection: When exposed to summer sunlight, the surface temperature can drop below 20 degrees Celsius, and the indoor temperature in the factory can be reduced by 6–12 degrees Celsius.
2. Waterproofing and leak repair, rust prevention, acid resistance, corrosion protection, and UV protection
3. Prevent roof aging and extend the service life of color steel tile factories by more than 10 years; it has an attractive appearance, and workers can still work on the roof after construction is completed.
4. The effective sound insulation from rain is particularly evident on the rooftops of steel structure factories.
5. The rusted holes in the color steel tile roof do not need to be replaced.
6. The cold resistance is unaffected even at -40 degrees Celsius; the aluminum layer outside is fire-resistant and flame-retardant.
●Scope of application:
Generally used for heat insulation, waterproof repairs, soundproofing, rust prevention, damage restoration, and aging renovation on rooftops of steel structure factories and other building roofs: it is a high-quality material for heat insulation and waterproof repairs. After installation, during summer sun exposure, it can reduce indoor temperature by 30%-40%, with greater cooling effects at higher temperatures.

WeChat same number; 15725773228

Requirements for construction base layer operational conditions:

1. The color steel tile base surface has no dust and no looseness. The loose areas will be treated before construction can proceed.

Construction Techniques:

1. Clean the base surface:
Use a mop to remove the dust from the color steel tiles. If there is rust, it must be removed to achieve a smooth and clean surface.

2. Create an additional layer:

Additional layers should be applied to corners, ventilation openings, gutters, etc. The additional layers are 15–30 cm wide and laid along the central axis of the corners.

3. Large-scale construction:

A: First, draw the reference line, so the laid material will be neat and beautiful.

B: When laying the membrane, align the square membranes at the intended construction area, starting from the downward flow direction. For vertical walls, lay them from the bottom upward.

C: Remove air, roll the material to press out the air inside, then securely attach the material.

D: On the color steel tile nail cap,At the nail cap area, tape can be cut into small pieces and applied. For repairing old roofs with local leaks, local construction can be used for application.

E: The lap length of the rolls is 5 cm

F:When passing the nail cap, it is not easy to pull the roll too tightly. Instead, loosen the roll so that the roll on the nail cap is not subjected to excessive force.

4: Local construction

For local construction areas such as the joints of color steel tiles, gutters, fans, and light wells,

The self-adhesive tape is used to apply the material to key areas such as the joints between colored steel tiles on the roof, gutters, fans, and light wells.

At the nail cap area, the tape can be cut into small pieces and applied. For repairing old roofs with local leaks, local construction can be used for application.