tile leveler insert base wedge tile cross push clamp tile tools tile leveling device

 Tile leveling tool introduction

1.The method of use and precautions for tile leveling tools

2.Standard Operating Procedures

1. Preparation StageClean the tile surface to ensure there is no dust or scratches, and select the leveling tool specification according to the tile size.5。
2. Installation fixedInsert the leveling base into the gap between tiles, and the steel pin clamps must be vertically clamped to the edge of the tile to prevent displacement.1。
3. Leveling operationAdjust the leveling device to make the adjacent tiles flush, and use a 2-meter straightedge to verify the flatness error to be less than or equal to 3mm.35。
4. Removal timingAfter the application, remove the leveling tool within 5 hours (before the initial setting of cement) to avoid residual effects on jointing.5。

Key Points to Remember

• Trial Layout SuggestionThe tool should be first used in a small area (such as 1 square meter) to familiarize yourself with the tool before applying it to a larger area.1。
• Air-sucking controlAfter the application, it is necessary to check the air pocket rate. The area of a single air pocket should not exceed 10%, and the total air pocket rate should be less than or equal to 5%.3。
• Maintenance and MaintenanceAfter each use, thoroughly clean the steel needle clamp to prevent cement mortar residue from causing rust.1。