Type: Passive, Single 10-inch Two-way Linear Array Speaker
◆ Horn Unit: LF 1x10" Neodymium Magnet / Voice Coil ∅65mm / Neodymium Magnet
HF 2x1.73" Neodymium Iron Boron Compression High Tone / Voice Coil ∅44mm
Rated impedance: LF 8Ω; HF 16Ω
Rated Power (AES): LF 350W / HF 100W
Peak Power (AES): LF 1400W / HF 400W
Frequency Response (-3 dB): 55 Hz-18 kHz (-10 dB)
Sensitivity (1m/1W): LF 98dB; HF 112dB
◆ Pointing (H * V): 120°x 10° Vertical Adjustable
Maximum Sound Pressure Level (1m/1W): LF 123dB (Continuous)/ 132dB (Peak)
HF 132dB(连续）/ 142dB(峰值）
Surface treatment: black sand paint
◆ Sheet Material: 15mm Multi-Layer Birch Plywood
Dimensions (W*D*H): 500×420×310 mm
Weight: 24kg
◆ Grid: Hexagonal Hole Grid + Inner Covering Sound Transmission Cotton
Support: Support rods and 4-point suspension, adjustable from 0° to 10°.

Connectivity: Neutrik NL4 speaker socket LF 1+1- / HF 2+2-

Type: Active Single 18-inch Line-Array Subwoofer Speaker
◆ Horn Unit: 1x18" Ferroelectric / Coil Diameter 100mm / Magnet Diameter 220mm
Rated Impedance: 8Ω
Rated Power (AES): 800W
Peak Power (AES): 3200W
Frequency Response (-3 dB): 35 Hz-200 Hz
Sensitivity (1m/1W): 98dB
◆ Pointing (H * V): None
Maximum Sound Pressure Level (1m/1W): >127dB (Continuous)/ 136dB (Peak)
Surface treatment: black sand paint
◆ Sheet Material: 18mm Multi-Layer Birch Plywood
Dimensions (W*D*H): 500×845×540mm
Weight: 50kg
◆ Grid: Hexagonal Hole Grid + Outer Covering Acoustic Transparent Cotton
4-point suspension
Voltage Requirement: 220V ~ 50Hz
◆ Amplifier Module: 3 Channels
Circuit Type: Class D
Cooling Method: Fan Forced Cooling
Output Power: USB/1300W; LF/400W; HF/400W @ 8Ω
◆ Total Harmonic Distortion: ≤1% @ 1kHz, Full Power 8Ω
Signal-to-Noise Ratio: 100dB @ 20 Hz - 20kHz A-weighted @ 8Ω
Input Sensitivity: 1V
Input Impedance: 20KΩ
◆ Working Impedance: 8Ω
DSP functions: Mute, Polarity, Gain, Delay, Limiter, Mixer, EQ, XOver
DSP Control: USB and RS-485
Protection: Short, DCP, OVP, UVP, OCP, OTP
◆AC Power Input: powerCON NAC3MPA
Audio Input: Male and Female XLR
Audio Output: Neutrik NL4 Speaker Clip LF 1+1- / HF 2+2-