shangu waterproof liquid adhesive shoe adhesive repair leather shoes sneakers sole shoe factory SHANGU 防水液体粘接剂鞋子粘合剂修皮鞋球鞋运动鞋鞋底鞋厂

2. Packing quantity: 144/288 cards;Item.

3 Uses: Adhesive for leather shoes, travel shoes, boots, and various types of shoes.

This adhesive can be used on boards such as plywood, particle board, fireproof boards, density board, linen board, beech board, aluminum-plastic board, etc.; it also can bond certain materials including steel, aluminum, rubber, plastic, leather, and fabric.
This adhesive is widely used in interior decoration, art advertising, and car interiors.

Instructions for use:

Remove any grease, dust, or other contaminants from the bonding surface. If the surface contains a release agent (a substance applied to the mold during molding to prevent adhesion), use a solvent to remove it before bonding. For particularly smooth and difficult-to-adhere surfaces, roughing is required. When the moisture content is high, dry the surface first, then proceed with bonding.

◆ Use a brush or scraper to evenly apply glue on the bonding surface from the inside out (if a large area is being bonded, it is recommended to apply glue on both surfaces simultaneously). Allow it to dry at room temperature with a humidity of less than 70% for 5–15 minutes (until the glue layer becomes slightly non-sticky to the hand).

◆ Align the bonding surface once, press from inside out to remove air bubbles, then tap firmly with a rubber or wooden hammer until compacted; the usable strength can be achieved after 24 hours