microporous atomizer plate humidifier accessories 16mm energy exchange sheet ultrasonic nebulizer piece atomizer plate water replenishing instrument atomizing spray head rubber gasket 20

           ★★★★ Advantageous Supply ★★★★

We are a manufacturing company with independent development capabilities, dedicated to creating a one-stop wholesale procurement platform for humidifiers and atomization films. We provide offline and online merchants with current market products that sell well, custom atomization films, mass production, custom drive boards, and custom logistics delivery! Product after-sales service offers a 7-day return and exchange policy without any reason!

（Replacement products must maintain their original packaging and appearance; return and exchange fees are to be borne by the customer, and custom products are not eligible for returns.）

Three times: something important.

★ We are direct manufacturers, so the price is very competitive, and the after-sales service is more guaranteed! ★

★ We are direct manufacturers, so the price is very competitive, and the after-sales service is more guaranteed! ★

★ We are direct manufacturers, so the price is very competitive, and the after-sales service is more guaranteed! ★

The net diameter of the fogging steel sheet is 16mm, the outer diameter of the silicone ring is 20mm, and the wire length is 8cm.Product voltage: DV 5V, current: 300mA, power: 2W, frequency: 108KHz (113Hz)KHzHole count 1000 (customizable), hole diameter 5um (customizable), port size 2.0 (customizable)

Attention:This product is only suitable for 5V DC power from USB, and is not suitable for 220V AC power from household sockets.

This link comes with connectors, wires, and silicone seals. The separate atomizer will not produce mist unless it is paired with a driving circuit board.

This micro-porous atomization sheet product features:

1. Ultra-fine spray particles, large amount of atomization, high atomization height, not wet the tabletop.

2. Low driving voltage, low power, low impedance, stable waveform, high conversion efficiency.

3. Low dielectric loss, low heat generation, corrosion resistance, acid and alkali resistance, long service life.

4. Anti-flat convex, middle spray, 5um ultra-fine spray aperture, 1000 ultra-dense spray holes.

5. The anti-oxidation silver layer protection coating process has a service life of about 3000 hours.

This micro-porous atomizing sheet contains terminal connections, and it can be directly used if there are female sockets on the circuit board, without the need for welding.

If the wire of the atomizing sheet in your humidifier is directly soldered to the circuit board, you can solder the original red wire (positive) and black wire (negative) separately with an electric soldering iron.If you don't have a soldering iron, you can also directly connect the red wire (positive) and the black wire (negative) with electrical tape.

Special Note: The atomizing film requires a circuit board to drive to work normally, and it will not work if it is used alone. 

Product SpecificationsResonant frequency: 108.0±5.0kHz, resonant impedance: 150Ωmax, static capacitance: 3000pF±20% at 1.0kHz, input voltage: 5～12VDC, rated voltage: 70Vp-p max, input power: 2.5W max.(Normal use 1.5W), testing environment: 23±3℃ 40～70%RH, storage temperature: -30℃～+80℃, life time: 3000hour, atomization quantity: 15～450ml/hour

This micro-porous atomizing sheet matches the frequency of 80% of the humidifiers on the market, but there is a 20% chance that the frequency may not match. The key factor in determining normal fog generation and the amount of fog is for the circuit driving board and the atomizing sheet to achieve the same frequency.

The most common size of the atomizing steel sheet currently on the market is 16mm in diameter and 108kHz in frequency, which is consistent with our product specifications.

Please consider carefully before purchasing, we will not assume all responsibility for any abnormal operation of the new replaced atomizer film. Because the frequency of each atomizer film and circuit board may not be matched, and the parameters set by each manufacturer are different. In addition, if there is no mist, it may be due to the circuit board chip being burned, leading to the atomizer film being unable to work normally.