intelligent network-type height and weight testing instrument height and weight scale 智能网络型 身高体重测试仪器 身高体重秤

Instructions Manual for Height and Weight Scale

(<T_ZCS-1> Type)

1, Feature Introduction

Meanwhile, measure the height and weight, and display the data for both height and weight clearly.

2, Instrument Features

Floor-standing, voice synchronization alert function, wide-screen LCD display.

3, Instructions for Use

Connect the communication interfaces between the host and the weight base, as well as the height testing rod, and power on the device. It displays “Welcome to KEDU Testing Device”. Press the “Start” button, and a voice prompt appears: “Please begin the test”. The person being tested stands barefoot in a standing position with light clothing on the bottom plate of the height and weight meter (upper limbs hanging naturally, heels together, toes apart).60(t_XXXXXXXX); note that do not shake the device from side to side during measurement. Once the weight value is locked, the instrument will prompt “Please measure height”. The tester pulls the buoy and slides down along the force column until it touches the person being measured, then stops sliding. After the height value is locked, the instrument will indicate “Measurement completed, next in progress”).Every time the test is completed, push the buoy to the designated point., proceed directly to the next round of testing.

The test results after that will be announced via voice, if you want to disable the voice announcement feature, please press the “Voice Key”.

4, Precautions

(a) Before turning on the power, please make sure the height buoy is pushed to the correct position; no heavy objects should be placed on the base.

(b) After several tests, if it is found that the height measurement data is not accurate, please reset the buoy to the original position again before conducting further tests.

(c) If the results are found to be inaccurate after several tests, please turn off the power and restart the device.

(d) This instrument should be placed in a flat area against a wall, and the level adjustment feet should be adjusted to ensure stability.

(e) Master the measurement requirements of “three points against the column” and “two points at a horizontal level”.

(f) The hair braid and knot on the head should be loosened, and the accessories should be removed.

(g) Do not move your body during the measurement.

(h) Before the measurement, participants must not engage in sports or physical labor.

• Technical Parameters

quantity   Cheng: Height:90～210 CMWeight:5～150 kg

Precise   Unit: Height:0.1%,Weight:0.3%

Resolution: Height:0.1 ,Weight:0.1 kg