wholesale five-star brand photosensitive seal oil new packaging one kilogram large barrels. butterfly 1000ml photosensitive special seal

 








 

Colors available: red, dark blue, sky blue, black, purple, green, fuchsia, orange, pink, yellow, brown.

Photocopy ink refers to the special ink for photocopy seals, which has the characteristics of ink not easily settling, bright colors, and high color density; the seal is clear and uniform, without
Ink absorption is fast, dries immediately after printing, with strong resistance to high and low temperatures, and excellent stability. It does not react adversely with printing pads and seal shells, and can be reused.
The characteristics of refueling.
Ink: Usage Method
Is your own seal a photocopy seal? To avoid using the wrong ink, once the wrong ink is used, this seal will become invalid.
Pump ink: Squeeze the ink onto the stamp surface and let it seep down by itself. There is also a kind of photocopying ink. The surface of the shell has a small hole. This is more convenient. Just squeeze it into the hole.
When used less frequently
Just add a little oil before use. Method: remove the cover, let the text face up, apply a small amount of photocopying ink to the border, font, and image of the seal, wait for the oil to slowly penetrate, and then apply more oil as needed.
Then wipe away any excess oil with a clean soft cloth or tissue, and it's ready to use immediately.
When the usage is large
Refill the ink of the stamp by adding ink from the oil filling port at the bottom of the handle. Method: Place the stamp on the desk with the handle facing up, pull open the oil filling cover at the bottom of the handle, take a small bottle of ink (if using a large bottle, it is best to use a separator bottle or similar), align the tip of the bottle mouth with the oil filling port, and drop by drop to add ink. If the oil filling port is too small for the stamp to be added smoothly, you can slightly shake the stamp to allow the ink to naturally flow in. Generally, there is a sponge-like storage for ink in the light-sensitive stamp, which will temporarily absorb excess oil and then gradually permeate to the light-sensitive pad later.
Other methods
Remove the photo-sensitive pad and immerse it in the ink, ensuring that the printing side faces up. Ensure that the ink does not exceed the thickness of the photo-sensitive pad, allowing it to slowly absorb the ink. If the seal has a sponge-like body, you can add some oil to it. After the photo-sensitive pad is fully filled with ink, remove it and place it in the seal case.