engraving machine photosensitive seal machine portrait photosensitive machine seal material wholesale

The operation process of the photocopy stamp:

1) Print the prepared proof on acid paper using a laser printer.

2) Cover the transparent exposure film according to the specification of the master sample, ensuring that it is large enough to completely cover the master sample.

3）The sequence and orientation of the printout, the exposure film, and the photocopy stamp pad are as follows: the printout is on the top layer with the printing side facing down, the middle layer is the exposure film, and the third layer is the photocopy stamp pad. The three layers should be contact with each other smoothly and tightly, with no gaps or folds in the middle. Use a clamping device to press down firmly. If the clamping device is not tight enough, place 2 business cards under the photocopy stamp pad, which will improve the effect.

Insert the fixture into the photocopy machine.

4) Turn on the power and open the main power switch, then turn on the charging switch, and the photocell will start charging.

5) When the light-sensitive machine's charging indicator reaches the required exposure voltage for the chapter pad, turn off the power, press the trigger button, and complete the exposure.

6) Remove the exposure box from the machine, open the exposure box, take out the exposed stamp pad, remove the sulfuric acid paper and the exposure film.

7) Insert the exposed stamp pad into the corresponding stamp shell.

8) Inject the scale ink according to the seal specification, after the ink is evenly distributed and absorbed, it can be delivered to the customer for use.