car high pressure tire metal portable air pump

Product Introduction:

Featuring a metal movement, it is highly durable and powerful. It charges quickly, operates smoothly, produces low noise, and has an oil-free cylinder design with an built-in pressure gauge. It comes with high-quality power cables and air inflation tubes. This air pump offers strong power and fast inflation—more powerful and faster than other air pumps. It can be used for cars, jeeps, off-road vehicles, SUVs, commercial vehicles, small vans, etc. For four-wheel drive tires, it can inflate from 0 to 35psi (0-2.5kg) in just 3 minutes.

Product Features:

1. A multi-purpose vehicle air pump that can inflate and measure tire pressure at 100 psi. It is very convenient to use.
2. The quality and craftsmanship are both excellent, meeting international standards.
3. When a car tire suddenly loses air on a highway or in the field, this device can better fulfill its emergency function.
4. This device doesn’t take up space; simply prepare one at the right time and store it in a suitcase—its uses are endless.
5. It ensures that car tires maintain the correct pressure at all times, saves fuel, and enhances safety.

Precautions:
1. This device cannot be used for inflating tires on heavy and large vehicles, such as trucks and freight cars.
2. When in use, the car engine should be activated to enhance power, without consuming the car's battery.
3. This device is only compatible with a DC power supply of 12V and 10A; it cannot use household electricity at 110V. If household electricity is desired, a transformer must be installed.
4. For car tire inflation, it is best to take a 15-minute break every 15 minutes. Allow the device to cool slightly before use, which can extend the motor's lifespan. When inflating a rubber boat, it can be used continuously for half an hour.
5. For general car tires, it takes approximately 5–8 minutes to reach a normal tire pressure of 220 kpa. Larger tires may require a slightly longer time. If the inflation starts, the gauge needle rises rapidly and reaches 490 kpa in about two to three seconds, indicating that air is not entering the tire. In this case, the power source must be turned off immediately, the air nozzle removed, and the process repeated; otherwise, the gauge and motor may be damaged.
6. When using this device, do not leave the machine unattended. Always monitor the tire pressure, and the inflation should not exceed the specified standards set by the vehicle or tire manufacturer.
7. This device should be protected from moisture, heavy impacts, and soil ingress.
8. Children are prohibited from using it to avoid unnecessary harm

Stress Comparison Table:

lb/in2 - kg/cm2 - kpa
26 - 1.80 - 176
28 - 1.95 - 191
30 - 2.10 - 206
32 - 2.24 - 220
34 - 2.40 - 235
36 - 2.50 - 245
38 - 2.65 - 260
40 - 2.79 - 274

Instructions for Use:

1. Insert the lighter head into the 12V car socket, then insert the rubber tube along with the corresponding nozzle into the tire valve to inflate the tire.

Instructions for use: Insert the cigarette lighter head into the 12V car socket, then insert the rubber tube along with the provided nozzle into the tire valve to inflate the tire.
Boosting power: 120w