8~16-inch square punching zhixin pizza plate family baking tray household baking tray kitchen supplies baking

Product Name: Thickened Square Pizza Plate/Home Cooking Tray

Specification: Please refer to Figure 1 for details.     

Punching hole diameter about: 3mm

High-quality aluminum alloy, thickness of 1.5mm, does not soften after 300-degree high-temperature baking.

Double-sided adhesive film processing, almost no flower marks.

3003 aluminum alloy

Anodic oxidation

Square Pizza Pan / Home Baking Tray

Anodic treatment is a surface coating technology for aluminum alloy molds. The common goal of these treatments is to prevent aluminum from leaching out at high temperatures, serving as a barrier, thereby protecting human health. Anodic coatings are a layer of electroplating film that forms a protective layer on the surface of aluminum alloy, making it less likely to decompose or leach out. Therefore, whether for the molds or for human health, there is a protective effect. However, the coating is relatively soft and can be scratched, so it is important to avoid using hard objects to clean it.

Anode Surface Treatment Characteristics:
1. Chemical corrosion resistance - resistant to alkalis, acidic.
2. Non-oxidizing - Clean, Hygienic, Long Service Life
3. Hygiene - Meets food hygiene standards
4. High strength, with a hardness of 9-11 degrees, durable and sturdy
5. The material is light, with a specific gravity of only one-third that of iron, making it even more lightweight.
6. Good heat transfer, saves baking time, and saves costs.

Anode Product Usage Instructions:
1. Before using the newly purchased anodized equipment, it must be first cleaned inside, then dried with warm fire, and finally oiled before use.
2. After each baking, please use a soft cloth or a soft plastic scraping tool to remove any residual materials left in the equipment.
3. After using the appliance for a while, it is best to clean it thoroughly with a soft cloth using warm water mixed with a small amount of neutral detergent to remove any residuals.

Anode Product Usage Notes:
1. Please do not use sharp metal tools, scrubbing pads, or chemical cleaners to clean.
2. Do not immerse in water or cleaning agents for a long time.
3. When using, please handle with care, and when storing, be careful to place gently, and avoid accidental collisions or friction due to carelessness, which may cause wear or scratches to the non-stick coating.
4. The baking temperature of the anode processing equipment is lower than 250 degrees, and it is ensured as much as possible to be uniformly heated, and it is not allowed to be burned empty.