thickened 6.5~16-inch factory direct sales zhixin pizza plate thickened punching round anode pizza plate

Product Name: Thickened Perforated Pizza Plate

 Specifications and dimensions are shown in the following diagram:

High-quality aluminum alloy, thickness of 1.5mm, does not soften after 300-degree high-temperature baking.

Double-sided adhesive film processing, almost no flower marks.

 The polished edge of the circle does not cut the hand.

3003 aluminum alloy

Anodic oxidation

Specifications include: 6.5 inches, 7.5 inches, 9 inches, 10 inches, 11 inches, 12 inches, 13 inches, 14 inches, 15 inches, and 16 inches.

 After purchasing a new cake mold for the first time, soak it in clean water to clean it, then wipe dry and apply a thin layer of oil to the inner wall of the mold.

Add a little oil, bake at a low temperature (about 150 degrees) for about 5 minutes in the oven, which will ensure that the product is more durable and non-stick.

 Please clean with a soft cloth, as hard cleaning tools or dry, hard cloths may scratch the non-stick coating on the surface.

Anodic treatment is a surface coating technology for aluminum alloy molds. The common goal of these treatments is to prevent aluminum from leaching out at high temperatures, serving as a barrier, thereby protecting human health. Anodic coatings are a layer of electroplating film that forms a protective layer on the surface of aluminum alloy, making it less likely to decompose or leach out. Therefore, whether for the molds or for human health, there is a protective effect. However, the coating is relatively soft and can be scratched, so it is important to avoid using hard objects to clean it.

Anode Surface Treatment Characteristics:
1. Chemical corrosion resistance - resistant to alkalis, acidic.
2. Non-oxidizing - Clean, Hygienic, Long Service Life
3. Hygiene - Meets food hygiene standards
4. High strength, with a hardness of 9-11 degrees, durable and sturdy
5. The material is light, with a specific gravity of only one-third that of iron, making it even more lightweight.
6. Fast heat transfer, saves baking time.

Anode Product Usage Instructions:
1. Before using the newly purchased anodized equipment, it must be first cleaned inside, then dried with warm fire, and finally oiled before use.
2. After each baking, please use a soft cloth or a soft plastic scraping tool to remove any residual materials left in the equipment.
3. After using the appliance for a while, it is best to clean it thoroughly with a soft cloth using warm water mixed with a small amount of neutral detergent to remove any residuals.

Anode Product Usage Notes:
1. Please do not use sharp metal tools, scrubbing pads, or chemical cleaners to clean.
2. Do not immerse in water or cleaning agents for a long time.
3. When using, please handle with care, and when storing, be careful to place gently, and avoid accidental collisions or friction due to carelessness, which may cause wear or scratches to the non-stick coating.
4. The baking temperature of the anode processing equipment is lower than 250 degrees, and it is necessary to ensure uniform heating as much as possible, and it is not allowed to be burned empty.